In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...

Stochastic inverse problems in heat conduction with consideration of uncertainties in the measured temperature data, temperature sensor locations and thermophysical properties are addressed using a Bayesian statistical inference method. Both parameter estimation and thermal history reconstruction problems, including boundary heat flux and heat source reconstruction, are studied. Probabilistic s...

Phase change cooling schemes involving passive heat spreading devices, such as heat pipes and vapor chambers, are widely adopted for thermal management of high heat-flux technologies. In this study, carbon nanotubes (CNTs) are fabricated on a 200 lm thick sintered copper powder wick layer using microwave plasma enhanced chemical vapor deposition technique. A physical vapor deposition process is...

For many natural and agricultural landscapes, vegetation partially covers the ground surface, resulting in significant variations in soil heat flux between interspace areas and underneath vegetation. This is particularly apparent in arid and semiarid regions where vegetation cover is low and clustered or ‘clumped’ with large areas of exposed soil. Surface heterogeneity presents significant chal...

In this paper, burning performance of liquorices was tested by cone calorimeter. The results indicated that liquorices were easily to be ignited, the minimum ignition heat flux intensity theoretically can be speculated at 5.8822kW • m;during the early time of the ignition of liquorices, in view of the thick carbonized layer formed on the surface of samples, which delayed the pyrolysis of liquor...

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

Extreme weather often contributes to crown fires, where the fire spreads from one tree crown to the next as a series of piloted ignitions. An important aspect in predicting crown fires is understanding the ignition of fuel particles. The ignition criterion considered in this work is the critical mass flux criterion – that a sufficient amount of pyrolysis gases must be generated for a diffusion ...

The study of flow and heat transfer over rotating circular disks is of great practical importance in understanding the cooling of rotatory machinery such as turbines, electric motors and design and manufacturing of computer disk drives. This paper presents an analysis of the flow and heat transfer over a heated infinite permeable rough disk. Boundary-layer approximation reduces the elliptic Nav...

Extreme weather often contributes to crown fires, where the fire spreads from one tree crown to the next as a series of piloted ignitions. An important aspect in predicting crown fires is understanding the ignition of fuel particles. The ignition criterion considered in this work is the critical mass flux criterion – that a sufficient amount of pyrolysis gases must be generated for a diffusion ...