background and aims. adding further fillers to dental resins may enhance their physical characteristics. the aim of this study was to evaluate the tensile strength of heat-curing acrylic resin reinforced by tio2 nanoparticles added into the resin matrix. materials and methods. commercially available tio2 nanoparticles were obtained and characterized using x-ray diffraction (xrd) and scanning ele...

Introduction: Rapid population growth and industrialization have increased chemical pollutants. Some studies show that employee exposure to formaldehyde in industrial places, hospitals, and laboratory settings is more than the allowed limits. Therefore, it is necessary to implement a proper control system to reduce this exposure. This study aimed to synthesize Ag3PO4/TiO2 nanocomposite, determi...

MWCNTs/TiO2 nanocomposite was prepared by oxidising MWCNT in H2SO4/HNO3 then decorating it with TiO2-p25 nanopowder. The composites were characterised using XRD, TEM, FT-IR PL and UV-vis spectroscopy. The TEM images have shown TiO2 nanoparticles immobilised onto the sidewalls of the MWCNTs. The UV-vis spectrum confirms that the nanocomposites can significantly absorb more light in the visible r...

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO2) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as count...

One of the most important applications of carbon nanotubes (CNTs) is as reinforcement of metal matrix composites, because of their excellent mechanical properties. In this study, Al-TiO2-multi walled carbon nanotubes (MWCNTs) nanocomposite is fabricated using isostatic pressing followed by hot extrusion. Mechanical alloying is used to mix powders of aluminium, TiO2 and MWCNTs. TiO2 with the amo...

Nanocomposite polymer electrolyte membranes (NCPEMs) based on poly(acrylic acid)(PAA) and titania (TiO2) are prepared by a solution casting technique. The ionic conductivity of NCPEMs increases with the weight ratio of TiO2.The highest ionic conductivity of (8.36 ̆ 0.01) ˆ 10 ́4 S ̈ cm ́1 is obtained with addition of 6 wt % of TiO2 at ambient temperature. The complexation between PAA, LiTFSI and T...

A unique nanocomposite C-TiO2 was prepared by the growth of TiO2 on carbon nanoparticles using a simple hydrothermal procedure. Transmission electron microscopic (TEM) measurements showed that the nanocomposites exhibited an average core diameter of approximately 5 nm with a rather well-defined lattice space (0.4 nm) that was somewhat larger than that (0.38 nm) of the (100) crystalline planes o...

In this paper, we have done the photodegradation of Methyl green dye in presence of prepared Ni0.10:La0.05:TiO2 nanocomposites. The nanocomposites of Ni0.10:La0.05:TiO2 was prepared by the solution impregnation method. The characterization of Synthesized TiO2 and Ni0.10:La0.05:TiO2 nanocomposites were done by X-Ray Diffractometer, SEM, TEM, UVVis, FT-IR, Band gap energy and BET. The photocataly...

In this study, TiO2-10%wt. carbon nanotube (CNT) nanocomposite powders were synthesized by sol-gel method at various hydrolysis rate affected by different reaction agents of acetyl acetone and benzyl alcohol. Crystallization of TiO2 was then achieved through calcination at 400 °C. The properties of nanocomposite powder investigated by scanning electron microscopy, X-ray diffraction and diffuse ...

A new kind of bio-nanocomposite photoelectrode was fabricated through direct immobilization of the bacterial photosynthetic reaction center (RC) proteins on a nanocrystalline TiO2 matrix prepared by anodic electrodeposition. The near-infrared (NIR)visible absorption and fluorescence emission spectra displayed that structure and activity of the RC remained unaltered on the nano-TiO2 film surface...