─ In a tire pressure monitoring system in which a pressure censor and a transmit antenna are contained in a tire, electromagnetic simulations of radiations from carcass embedded tires are requested. However, it is difficult to accurately determine these shielding effects. In this study, methods for performing accurate electromagnetic simulation by adopting the MoM scheme are determined. In the ...

A nonlinear model consisting “yaw, roll, longitudinal, lateral and pitch” has been developed in which, tire and suspension characteristics have been considered. Tire model is based on the elliptic concept and tire Calspan data. According to this tire model, cornering force and aligning moment are computed as a function of slip and camber (inclination) angles, normal load, tire adhesion characte...

A tire and landing gear test facility has been developed and incorporated into a Convair 990 aircraft. The system can simulate tire vertical load profiles to 250,000 lb, sideslip angles to 15 degrees, and wheel braking on actual runways. Onboard computers control the preprogrammed test profiles through a feedback loop and also record three axis loads, tire slip angle, and tire condition. The ai...

A simplified FE tire model has capability to solve a large deformation of a tire on a vehicle running simulation with acceptable computation time. We tried to simulate a vehicle cornering by using simplified FE tire models and a vehicle model which has a detailed kinematical structure of suspensions.1 Introduction Introduction of CAE in an automobile design is progressing in various fields, and...

Discarded vehicle tire casings are an important artificial habitat for the developmental stages of numerous vector mosquitoes. Discarded vehicle tires degrade under ultraviolet light and leach numerous soluble metals (e.g., barium, cadmium, zinc) and organic substances (e.g., benzothiazole and its derivatives [BZTs], polyaromatic hydrocarbons [PAHs]) that could affect mosquito larvae that inhab...

recently, mixtures of clay-tire chips are used as construction material in civil engineering projects. with respect to the tending for using these materials, it is necessary to know their mechanical behavior. thereby, a number of undrained monotonic triaxial tests are carried out on the specimens of pure clay and clay-tire chip mixtures. mixed specimens prepared by mixing pure clay with 10%, 20...

This research presents a fuzzy multi-objective model for a machine selection problem in a flexible manufacturing system of a tire company. Two main objectives are minimization of an average machine error and minimization of the total setup time. Conventionally, the working team uses trial and error in selecting a pressing machine for each task due to the complexity and constraints of the proble...

Materials such as waste tire chips were widely used to improve the strength of soil. The objective of this study is to discuss the residual strength or steady-state behavior of sand-waste tire chip mixtures. A series of undrained monotonic triaxial compression tests were conducted on reconstituted saturated specimens of sand and sand-tire chip mixtures with variation in the tire-chip contents f...

submitted for consideration for the DRUID 2002 Summer Conference. “Industrial Dynamics of the New and Old Economy – who is embracing whom?” We would consider the paper relevant to either Theme B (“Production and Use of Knowledge in the Old & New Economy”) or Theme A (“Technical Change, Corporate Dynamics & Innovation”). The current debate of the ‘New Economy’ is largely dominated by approaches ...