This paper presents the improvement of transient stability of a multi-machine power system with a STATCOM. Transient stability improvement is essential from the view point of maintaining system security that is the incidence of a fault should not lead to tripping of generating unit due to loss of synchronism. Static synchronous compensator is widely used in power system to control power by inje...

This paper mainly studies the main circuit topology, the working principle, modulation technique and control strategy of the STATCOM based on H-bridge. The STATCOM direct power control algorithm based on the virtual flux is used to control the AC side reactive power compensation, and in accordance with the principle of conservation of power, the DC side voltage imbalance factors are analyzed, a...

This Paper presents the orientation procedure for diagnosing the power quality problems in different fault occurring conditions by using Distribution STATCOM (DSTATCOM) with linear loads. Here the resistance switching is used to get the pure sinusoidal voltage compensation. This modelling and simulation of D-STATCOM is achieved by using pure sinusoidal Pulse Width Modulation Technique. The majo...

FACTS technology has considerable applications in power systems, such as; improving the steady stateperformance, damping the power system oscillations, controlling the power flow, and etc. STATCOM is oneof the most important FACTS devices used in the parallel compensation, enhancing transient stability andetc. Since three phase fault is widespread in power systems, in this paper STATCOM is used...

Grid-tied inverters are the key components of distributed generation system because of their function as an effective interface between renewable energy sources and utility. Recently, there has been an increasing interest in the use of transformerless inverter for low-voltage single-phase grid-tied photovoltaic (PV) system due to higher efficiency, lower cost, smaller size and weight when compa...

A current source converter (CSC) based static synchronous compensator (STATCOM) is a shunt flexible AC transmission system (FACTS) device, which has a vital role in stability support for transient instability and damping support for undesirable interarea oscillations in an interconnected power network. A robust pole-shifting based controller for CSC-STATCOM with damping stabilizer is proposed. ...

Flexible ac transmission systems (FACTS) controller can provide better control than conventional control and achieve fast control response time. Static synchronous compensator (STATCOM) is one of the key FACTS devices based on voltage source converter (VSC) technology whose capacitive or inductive output current can be controlled independent of the ac system voltage. In this review paper, the a...

A delta-connected STATCOM with cascade multilevel full H-bridge (FHB) converter has been applied for phase balancing and power factor correction of unbalanced load in a three-phase, three-wire power distribution system. In this paper, a feedforward compensation formula is presented for the STATCOM by using the symmetrical components method to compensate unbalanced load. Computer simulation is p...

Fig. 1.1 Shows the circuit configuration for a 19-level (lineto-neutral) H-bridge StatCom (H-StatCom). Each stack ofH-bridges essentially forms one phase of a threephase currentcontrolledvoltage source. The purpose of the H-StatCom isto modulate the voltage at the output of each stack so thatthe current through the inductors can be controlled to providepower factor correction, compensate for sy...

In this paper, an optimal power flow based approach has been applied for multi-transactions deregulated environment for ATC determination with SVC and STATCOM. The main contribution of the paper is (i) OPF based approach for evaluation of ATC with multi-transactions, (ii) ATC enhancement with FACTS devices viz. SVC and STATCOM for intact and line contingency cases, (iii) Impact of ZIP load on A...