The presence of particles such as algae, clay, organic materials and water-soluble substances often create turbidity or color in water. In recent years, electrocoagulation process has attracted an extensive attention due to its advantages. Since sand filters are widely used in water treatment industry and their corresponding backwash water is large in volume, turbidity removal will save water c...

Polymeric phosphate aluminum-ferric chloride (PPAFC) in this study was prepared. In order to obtain the optimum conditions for preparation of PPAFC, resulting in a better turbidity removal efficiency, parameters such as the molar ratio of Al/Fe, P/(Al+Fe), OH/(Al+Fe) as well as the reaction temperature were examined. Results showed that the optimal synthetic conditions were Al/Fe of 6:4, P/(Al+...

The use of synthetic coagulants is not regarded as suitable due to health and economic considerations. Studies were carried out in laboratory scale on deionised water containing synthetic turbidity of kaolinite. Experiments were carried out in four turbidity ranges: 10, 50, 500, 1000 (NTU) and the pH range 5-8. The efficiency of moringa oleifera seed extract and polyaluminum chloride was examin...

Turbidity, which is caused by suspended chemical and biological particles, can have both water safety and aesthetic implications for drinking-water supplies. Turbidity itself does not always represent a direct risk to public health; however, it can indicate the presence of pathogenic microorganisms and be an effective indicator of hazardous events throughout the water supply system, from catchm...

The processes of coagulation and flocculation using high molecular weight long-chain polymers were applied to treat mine water having fine flocs of which about 93% of the total mass was less than 3.02 microm, representing the size distribution of fine particles. Six different combinations of acryl-type anionic flocculants and polyamine-type cationic coagulants were selected to conduct kinetic t...

Pilotand full-scale evaluations of Giardia and Cryptosporidium cyst removals through direct filtration and conventional water treatment were conducted by the Utah Department of Environmental Quality. Cysts were seeded continuously in a step dose at a 0.5 gpm pilot plant, and in a spike at a 900 gpm full-scale plant; both plants were operated under conventional treatment and direct filtration re...

Background: Coagulation is a treatment procedure for metalworking fluids (MWFs). This study aimed to optimize coagulation using four coagulants and compare the results. Methods: In this research, the outputs of a coagulation procedure in chemical oxygen demand (COD) removal, turbidity, and the release of oil were investigated using four coagulants, ferric chloride (FeCl3), ferric sulfate (Fe2(...