as regards if curing stops for some time and then resumes again, then strength gain will also stop and reactive, in this study with choose suitable curing conditions after improper first curing (recurring) for normal and silica-fume concrete, effect of this curing conditions on strength and permeability was investigated. the results from tests such as compressive strength, capillary water absor...

background and aims. substituting chlorhexidine (chx) for water has been shown to enhance antimicrobial activity of mineral trioxide aggregate (mta). the purpose of this study was to compare the compressive strength of mta mixed with distilled water, 0.12% and 0.2% chlorhexidine. materials and methods. mta was mixed according to manufacturer’s instructions in group i (n = 20). in groups ii & ii...

The aim of this study is to evaluate the moisture effect on the strength of concrete specimens that has completely cured. This study is also aimed to develop relations that can be used to determine the properties of concrete with different moisture contents that are normally experienced in outside conditions. Numerous compressions and split tensile tests are performed. In order to better unders...

This paper reports the results of an experimental investigation into the effects of incorporating varying amounts of expanded polystyrene beads on the engineering properties of high-strength concrete. It was observed that a density reduction of 8.3% caused compressive strength, tensile strength and modulus of elasticity to reduce by 48%, 39% and 15%, respectively. Drying shrinkage was marginall...

For the design of steel and concrete structures, most modern international design codes allow the use of plastic stressstrain-diagrams for the analysis of the bending resistance of the cross-section in the ultimate limit state. Curiously, in Europe and most other parts of the world, timber structures are still designed for the ultimate limit state with the old, conservative concept of full elas...

Polymethyl methacrylate (PMMA) bone cement is a commonly used bone adhesive and filling material in percutaneous vertebroplasty and percutaneous kyphoplasty surgeries. However, PMMA bone cements have been reported to cause some severe complications, such as secondary fracture of adjacent vertebral bodies, and loosening or even dislodgement of the set PMMA bone cement, due to the over-high elast...

Osteoporosis is a disease inwhich low bonemass andmicroarchitectural deterioration of bone tissue lead to enhanced bone fragility and susceptibility to fracture. Due to the complex anatomy of the vertebral body, the difficulties associated with obtaining bones for in vitro experiments, and the limitations on the control of the experimental parameters, finite element models have been developed t...

This study investigates the effect of cement on the performance of soil, collected from Khanjahan Ali Hall at Khulna University of Engineering & Technology (KUET) in Khulna, Bangladesh. The addition of cement was found to improve the engineering properties of available soil in stabilized forms specifically strength, workability, and compaction and compressibility characteristics. Therefore, lab...

This article presents the results of a study dealing with the utilization of sludge water from a concrete plant as a partial replacement for mixing water in the production of cement composites. The replacement of mixing water with sludge water from a concrete plant was carried out in the amounts of 20% and 50%. The following tests were carried out in order to determine the effect of the replace...