The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...

the johor strait is an estuarine system located on the coast of the state of johor in malaysia.the western part of johor strait is a shallow estuarine located between causeway and pulai river. ahydrodynamic model was calibrated based on the environmental fluid dynamic code (efdc) from 4th to 17th of october, 2009. in this calibration, the efdc hydrodynamic model was configured to simulate time ...

influence of a vent hood at the exit of exhaust flue gas and flue baffles in the firetube on the temperature and flow fields of a gas tank water heater, as well as thestructure and amount of heat transferred to the water tank has been studiednumerically using two-dimensional steady state finite element simulation.observations show that without a vent hood, there is a downward gas flow in theflu...

this work presents a model for calculating the effective ‎thermal conductivity of nanofluids. the proposed model ‎includes the effects of nanoparticles and thermal conductivity ‎base fluid.we will focus on experimental of the volume ‎concentration parameter and temperature on thermal ‎conductivity, nano-fluid combination and multi-walled ‎carbon nanotubes-oxide / copper-paid deionized water. th...

the effect of γ-al2o3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-al2o3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. since the properties of γ-al2o3-water nanofluids were variable, they were ...

one of the cooling systems that has received considerable attentions in recent years is the adsorption chiller, which works based on the adsorption and desorption of a working fluid in a solid porous bed. different parameters such as fin height directly affect the bed heat and mass transfer processes, and therefore, the performance of the adsorption chillers. in the present study a numerical mo...

BACKGROUND Findings on water and total fluid intake and bladder cancer are inconsistent; this may, in part, be due to different levels of carcinogens in drinking water. High levels of arsenic and chlorinated by-products in drinking water have been associated with elevated bladder cancer risk in most studies. A pooled analysis based on six case-control studies observed a positive association bet...

In present work a experimental study based on thermosyphon is investigated using a solid nano-particles added to water as a working fluid. Tests are made on a thermosyphon. The experiment was performed in order to measure the temperature distribution and compare the heat transfer rate of the thermosyphon with the nano uid and with pure water. The tested concentration level of the nano-particles...

background: adhesion is a common complication of gynecology surgery so different barrier agents and solutions have been used during these operations to separate and protect tissues from adhesion after surgery. adept is one of these solutions that have been postulated to reduce the chance of adhesion following gynecolgy surgery. objective: to evaluate the effect of 4% icodextrin in reducing adhe...

the aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (nepcm) slurry as a cooling fluid instead of pure fluid. a threedimensional model of a circular channel using water slurry of nepcm was developed. the results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...