To improve the usage of material in fatigue loaded complex welded structures a better calculation method (based on FEA) is needed than what is available on the market and an improved management of weld quality. Improved FE-procedures are directly applicable to design of generic structural components within virtually all industries using CAD and FEtools, irrespective of industrial sector. More a...

A crack detection (CD) paint was applied to weld lines of a transverse rib welded joint specimen of a rolled steel for welded structures, and the effects of the paint on visual detection of fatigue cracks were evaluated by performing a fatigue test. Remarkable color development was observed in the CD paint when fatigue cracks propagated along the weld toe lines. At intervals in the fatigue test...

The production of custom and specific tube end shapes by cold end forming using a die is generally limited to seamless tubular parts. Current research work in the field follows the same trend as that of industry and, therefore, there is no accumulated experience, no practical design rules, and no information available in the specialized literature concerning the utilization of tube end forming ...

Limiting dome height (LDH) tests were used to evaluate the formability of laser butt welded blanks of the dual phase 980 steel in comparison with the base metal. Two different lasers were used: diode and Nd:YAG, giving a wide range of welding thermal cycles. A sharp decrease in LDH was observed in the welded specimens due to the formation of a softened zone in the outer heat affected zone. Soft...

The detection and classification of the defects in the welded components are very important in order to ensure the structural integrity of the fabricated components of the test blanket module (TBM). RAFM steel is used as structural material for the TBM, therefore ultrasonic based technique are the most suitable for high sensitive defect detection. In this work ultrasonic pulse echo technique is...

 In this study, high-carbon, chromium alloy steel (100Cr6) having the initial spheroidized microstructure was welded using the rotary friction welding method. The effects of process parameters such as friction time and friction force were experimentally investigated. The friction welded joints were produced of two 100Cr6 steel rods. In order to examine the microstructure and mechanical properti...

ASTM A 182 F22 steel, used in components subsea for oil extraction, are previously buttered with ductile metal such as Inconel 625, before being welded to steel pipes similar A36 steels. The thermal buttering weld cycle provides the formation of high hardness micro-phases and carbides at interface between Inconel, which when contact hydrogen, originating from cathodic protection applied these e...