Five hundred-nanometer-thick ZnO-based textured polycrystalline films consisting of 490-nm-thick Al-doped ZnO (AZO) films deposited on 10-nm-thick Ga-doped ZnO (GZO) films exhibited a high Hall mobility (μ H) of 50.1 cm(2)/Vs with a carrier concentration (N) of 2.55 × 10(20) cm(-3). Firstly, the GZO films were prepared on glass substrates by ion plating with dc arc discharge, and the AZO films ...

Reactively sputtered ZnO thin film gas sensors were fabricated onto Si wafers. The atmosphere dependent electrical response of the ZnO micro arrays was examined. The effects of processing conditions on the properties and sensor performance of ZnO films were investigated. Using AFM, SEM, XRD and WDS, the O2/Ar ratios during sputtering and Al dopant were found to control the property of ZnO films...

Cu-doped p-type ZnO films are grown on c-sapphire substrates by plasma-assisted molecular beam epitaxy. Photoluminescence (PL) experiments reveal a shallow acceptor state at 0.15 eV above the valence band edge. Hall effect results indicate that a growth condition window is found for the formation of p-type ZnO thin films, and the best conductivity is achieved with a high hole concentration of 1...

Background & Objectives: Nanotechnology is one of great important part of technology. Nanoparticles can be used in different applications for industrial, medical, military and personal use. The objectives of this study were preparation of Polystyrene/ZnO nanocomposite films via a simple method and investigation of antibacterial activity of them. Materials and Methods: Polystyrene/ZnO nanopartic...

Well-dispersed fish gelatin-based nanocomposites were prepared by adding ZnO nanorods (NRs) as fillers to aqueous gelatin. The effects of ZnO NR fillers on the mechanical, optical, and electrical properties of fish gelatin bio-nanocomposite films were investigated. Results showed an increase in Young's modulus and tensile strength of 42% and 25% for nanocomposites incorporated with 5% ZnO NRs, ...

In this research work, the production of undoped and silver (Ag) doped zinc oxide (ZnO) thin films for food packaging applications was developed. The main goal was to determine the influence of coatings morphology and thickness on the antimicrobial performance of the produced samples. The ZnO based thin films were deposited on PET (Polyethylene terephthalate) by means of DC reactive magnetron s...

We study the possibility of preparing thin CdS films on conductive glasses by high temperature molten salt electrocrystallization. The CdS films have been electrodeposited on ZnO or ITO coated glass substrates in solution of CdCl2 and Na2SO3 in fused LiCl–KCl eutectic. They consist only of hexagonal phase α-CdS irrespective of the crystal structure of the substrates (hexagonal for ZnO and cubic...

The effects of zinc oxide nanorod on the barrier, sorption isotherm and antibacterial properties of tapioca starch/bovine gelatin Bionanocomposite films were investigated. The nanorod-rich ZnO (ZnO-N) was homogenized by sonication and incorporated into tapioca starch/bovine gelatin solutions at different concentrations (e.g. 0.5, 2, and 3.5% w/w dried solid). Incorporation of 3.5% of nanopartic...

Nanoscale ZnO is one of the best choices for ultraviolet (UV) protection, not only because of its antimicrobial properties but also due to its potential application for UV preservation. However, the behavior of nanostructured thin ZnO films and long-term effects of UV-radiation exposure have not been studied yet. In this study, we investigated the UV-protection ability of sol gel-derived thin Z...

Photoluminescence (PL) properties of undoped ZnO thin films grown by rf magnetron sputtering on silicon substrates have been investigated. ZnO/Si substrates are characterized by Rutherford backscattering (RBS), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). ZrO 2 thin films have been deposited on ZnO using microwave plasma enhanced chemic...