[1] The paper investigates the influence of relative bend curvature on secondary flow, energy losses, and turbulence in sharp open-channel bends. These processes are important in natural streams with respect to sediment transport, the bathymetry and planimetry, mixing and spreading of pollutants, heat, oxygen, nutrients and biological species, and the conveyance capacity. Laboratory experiments...

this paper presents a numerical study of local mass transfer coefficients in a 90° bend using the rng version of k–e model to include the influence of curvature on the turbulent transport. simulations were performed for flow through a 90°, 3-d bend for reynolds numbers of 13500, 90000, and 390000, schmidt numbers of 2.53 and 700 and curvature ratios of 1.5, 2, and 2.5. the differences between t...

The in vitro fracture toughness of human dentin has been reported to be of the order of 3 MPa (square root)m. This result, however, is based on a single study for a single orientation, and furthermore involves notched, rather than fatigue precracked, test samples. The present study seeks to obtain an improved, lower-bound, value of the toughness, and to show that previously reported values may ...

Recently, many research studies have focused on labyrinth weirs' hydraulic performance, especially as dependent engineering features. In the current study, properties of flow over triangular weirs models (from upper perspective) with sharp crest been experimentally studied and compare their efficiency suppressed rectangular (conventional weirs). Twelve fiberglass are developed for this reason t...

In this paper the laminar flow in the rectangular channel bends is simulated using numerical techniques. The turning angle of the channel bend and the area ratio of the channel cross-section are two important parameters to be examined. For flow simulation, the body fitted 3-D continuity and momentum equations are used and a body fitted general purpose code is developed. The existing results of ...

In this paper the laminar flow in the rectangular channel bends is simulated using numerical techniques. The turning angle of the channel bend and the area ratio of the channel cross-section are two important parameters to be examined. For flow simulation, the body fitted 3-D continuity and momentum equations are used and a body fitted general purpose code is developed. The existing results of ...