The adsorption characteristics of methylene blue (MB) onto needles of Pinus sylvestris L., an unconventional bio-adsorbent, were investigated. Maximum removal of MB was found to occur at initial pH 5. Adsorption capacity increased from 84.46 to 99.73 mg/g with an increase in temperature from 20 to 45°C at 200 mg/L of initial MB concentration. Adsorption isotherms were modeled with the Langmuir,...

High surface area and highly mesoporous activated carbon fibers (ACF) were obtained by physical activation of natural precursors (vetiver roots and bagasse) with steam and chemical activation using phosphoric acid. The textural characteristics of the activated were determined by nitrogen adsorption study and mercury porosimetry and showed that interesting porosity were obtained (SBET up to 1600...

The mechanism, isotherms and kinetics of removal of two endocrine disrupting chemicals, 17β-estradiol (E2) and 17αethinyloestradiol (EE2) by activated carbon adsorption were investigated in an agitated non-flow batch adsorption studies. Mathematical models were used to describe the adsorption phenomenon with the kinetic and thermodynamic parameters evaluated using the adsorption equilibrium dat...

Removal of Pb 2+ from aqueous solutions using coconut shell carbons produced by KOH activation is performed in this paper. Morphology and pore structure characteristic of coconut shell carbons are analyzed by SEM and nitrogen adsorption techniques. Effects of adsorbent concentration, agitation time and initial ion concentration on the adsorption behavior are investigated, and adsorption isother...

experiments were set up to estimate the effectiveness of clinoptilolite for the removal ofarsenate from aqueous solutions. the removal of arsenate by the exchanged forms was analyzed in thelight of the langmuir model of adsorption. a kinetic study of adsorption was carried out at differentintervals of time, and the kad values were calculated by using lagergren’s equation. adsorption ofarsenate ...

the adsorption of lead (11) and copper (11) in a fixed bed column using activated carbonprepared from nipa palm nut was investigated. thomas model and yoon and nelson kinetic models were used to analyze the column performance. the rate constant for thomas model increased with increase in flow rate and initial ion concentration but remained constant at varying bed height. adsorption capacity for...

background and purpose:the presence of dyes in wastewaters may cause serious problems for the environment because of their high toxicity to aquatic organisms and unfavorable aesthetical impact. in the present study, multi-walled carbon nanotubes (mwcnts) were used for removal of anionic dyes direct blue 106 (db106) and acid green 25 (ag25), from water samples. materials and methods:mwcnts were ...

The rates of adsorption of three commercial reactive dyes and Cu(II) from water in the absence and presence of complexing agents using chitosan were measured at 308C. Three simplified kinetic models, i.e., pseudo-first-order, pseudo-second-order, and intraparticle diffusion, were tested to investigate the adsorption mechanisms. It was shown that the adsorption of reactive dyes and Cu(II) in the...

an agricultural waste i.e. rice husk has been used as a cheap adsorbent for the removal ofleadas a harmful heavy metal from contaminated water via adsorption. the adsorption capacity of rice husk was calculated by equilibrium models. the results showed that the adsorption process has the best accordance with langmuir model. the kinetics of the adsorption was also investigated and obtained that ...

The aim of the present work was to investigate the feasibility of Kattamanakku tree leaf powder carbon (KTC) for Acid Red-114 (AR-114) adsorption. The adsorption of AR-114 on KTC material was studied as a function of KTC dose (0.05-1.20g). , solution pH 3-10, contact time and initial concentration (70-380 mg/l)., The influence of these parameters on the adsorption capacity was studied using the...