We report on a promising Ni ~5 nm!/Al-doped ZnO ~AZO! ~450 nm! metallization scheme for low resistance and transparent ohmic contacts to p-GaN (5310 cm). It is shown that the as-deposited Ni/AZO contact shows a nonohmic characteristic due to the insulating nature of the as-deposited AZO. However, annealing the contacts at 450 and 550 °C for 2 min in air ambient results in linear current–voltage...

In this work ZnO and Mn-doped ZnO nanocrystals were synthesized by one-step aqueous solution method. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray (EDX) analysis and photoluminescence (PL) spectroscopy have been used to characterize the samples in detail. The XRD studies revealed that the ZnO and Mn-doped ZnO had wurtzite structure (hexagonal). The composi...

Transparent Conductive Oxide (TCO) films are widely used in optoelectronic devices, such as solar cells, LEDs, and Lasers. Utilization of these contacts directly affects the device efficiencies. Purpose this study is to produce optimize properties Aluminum doped Zinc (AZO) using a vapor phase technique, Atomic Layer Deposition (ALD) for (n+) a-Si:H surface silicon Heterojunction Solar Cells (HJ...

Morphological and optical characteristics of radio frequency-sputtered zinc aluminum oxide over porous silicon (PS) substrates were studied before and after irradiating composite films with 130 MeV of nickel ions at different fluences varying from 1 × 1012 to 3 × 1013 ions/cm2. The effect of irradiation on the composite structure was investigated by scanning electron microscopy, X-ray diffracti...

A novel photocatalyst of Ta-doped ZnO nanoparticles was prepared by a modified Pechini-type method. The antimicrobial study of Ta-doped ZnO nanoparticles on several bacteria of Gram-positive Bacillus subtilis (B. subtilis) and Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) were performed using a standard microbial method...

This report describes the effects of impurity-co-doping on transparent conducting Al-doped ZnO (AZO) films prepared by DC magnetron sputtering using a target composed of dopant powder added to a mixture of ZnO and Al O powder. The chemical 2 3 stability of transparent conducting AZO films could be improved by co-doping Cr or Co without significantly altering the original electrical and optical ...

Plasmonics combines attractive features of nanoelectronics and optics enabling highly integrated, subwavelength optical and electronic circuits. Conventional metal-based plasmonic devices have plasmonic resonances less than 1 μm, and thus metals interact effectively only with ultraviolet and visible light. The wide application of plasmonic devices hinges on practical demonstrations with low los...

The paper presents novel structures of Nano gas sensor arrays by using ZnO and doped with aluminum . ZnO Nanomaterial are successfully prepared using sol-gel technique . These include, similar and dissimilar structures. All used sensors are composed of zinc oxide doped with aluminum at different concentrations for dissimilar structures, and with the same concentration for similar structures. Th...

N-doped ZnO/g-C3N4 composites have been successfully prepared via a facile and cost-effective sol-gel method. The nanocomposites were systematically characterized by XRD, FE-SEM, HRTEM, FT-IR, XPS, and UV-vis DRS. The results indicated that compared with the pure N-doped ZnO, the absorption edge of binary N-doped ZnO/g-C3N4 shifted to a lower energy with increasing the visible-light absorption ...

One-dimensional pure zinc oxide (ZnO) and Y-doped ZnO nanorod arrays have been successfully fabricated on the silicon substrate for comparison by a simple hydrothermal process at the low temperature of 90°C. The Y-doped nanorods exhibit the same c-axis-oriented wurtzite hexagonal structure as pure ZnO nanorods. Based on the results of photoluminescence, an enhancement of defect-induced green-ye...