Microstructural evolutions during annealing of cold rolled AISI 304L and AISI 316L stainless steels were studied. Cold rolled AISI 304L alloy was fully martensitic but cold rolled AISI 316L alloy was partially martensitic due to the higher stability of the austenite phase in the latter. During continuous heating to elevated temperatures, the complete reversion of strain-induced martensite at 75...

cryogenic treatment can be used as a supplemental treatment that is performed on some tool steels between quenching and tempering as an effective method for decreasing retained austenite and increasing wear resistance. in this research, the effect of deep cryogenic treatment (dct) on dimensional stability and mechanical properties of 80crmo12 5 tool steel was investigated. the martensitic trans...

to investigate the effect of tempering treatment on mechanical properties and the microstructure ofdin 1.4021 martensitic stainless steel, austenite treatment was conducted for the samples at 1000ºc temperature for 60 min and then the samples were oil quenched. later, tempering treatments wereperformed for the samples at 500 ºc and 700 ºc temperatures for 2 and 5 h, respectively; then quenching...

There are important aspects of steel which are hidden from ordinary view and largely from the users of steels. They nevertheless determine the macroscopic behaviour. One example is that the magnetic properties of austenite determine that it has a larger thermal expansion coefficient than ferrite, whereas intuition would suggest otherwise given that austenite has a greater density. This and othe...

A brief qualitative mapping is given between austenite, tweed and twinned phases of martensite alloys and corresponding paramagnetic, spin glass and periodic phases in spin glass alloys. ‡ This paper is dedicated to John Pendry in celebration of his 65th birthday. § Permanent address A Simple Spin Glass Perspective on Martensitic Shape-memory Alloys 2

Modulated phases occur in numerous functional materials like giant ferroelectrics and magnetic shape-memory alloys. To understand the origin of these phases, we employ and generalize the concept of adaptive martensite. As a starting point, we investigate the coexistence of austenite, adaptive 14M phase, and tetragonal martensite in Ni-Mn-Ga magnetic shape-memory alloy epitaxial films. We show t...

A brief qualitative mapping is given between austenite, tweed and twinned phases of martensite alloys and corresponding paramagnetic, spin glass and periodic phases in spin glass alloys. ‡ This paper is dedicated to John Pendry in celebration of his 65th birthday. § Permanent address A Simple Spin Glass Perspective on Martensitic Shape-memory Alloys 2

A two-dimensional diffusion based model is developed to describe transformation of austenite into ferrite and pearlite under continuous cooling conditions. The nucleation of ferrite is assumed to occur over grain boundaries and the nucleation of pearlite is assumed to be taking place all over the grain and at growing ferrite–austenite interfaces, when the composition and temperature conditions ...

Data about an effect of cyclic γ-α-γ martensitic transformations on the structure state of reverted austenite Fe-31.7 wt.% Ni-0.06 wt.% C alloy are presented. The effect of multiple direct γ-α and reverse α-γ martensitic transformations on fragmentation of austenitic grains has been investigated by electron microscopy and X-ray diffraction methods. An ultrafine structure has been formed by nano...

Developing numerical methods for predicting microstructure in materials is a large and important research area. Two examples of material microstructures are Austenite and Martensite. Austenite is a microscopic phase with simple crystallographic structure while Martensite is one with a more complex structure. One important task in materials science is the development of numerical procedures whic...