The current work takes the results of numerical experiment implemented in Ansys finite element analysis program to create neural network and regression models two-beam laser splitting silicate glasses. glass cutting have been obtained DesignXplorer module Workbench using a face-centered version central composite design. processing speed, parameters beams, plate thickness, distance between radia...

In this study, the fatigue behaviors of non-patched and patched aluminum pipes were investigated numerically. The Finite Element Method was used for analysis in study. implemented with Ansys Workbench (15.0) program. Al 6063 type pipe, DP-460 adhesive [0/90]2 reinforced angled glass-epoxy composite patch material analyzes. As a result numerical it observed that size is an effective parameter st...

Abstract In order to improve the dynamic performance of FSAE racing car, finite element analysis and lightweight design sprocket are studied in this paper, Firstly, parametric modeling big formula car was carried out, then initial scheme out based on ANSYS Workbench software. The designed premise meeting requirements, reliability ensured. Finally, strength, safety factor life optimized model we...

For many engineers that use finite element analysis or FEA, it is very important to know how to properly model and obtain accurate solutions for complicated loading conditions such as shock loading. Transient acceleration loads, such as shocks, are not as common as static loads. Analyzing these types of problems is less understood, which is the basis for this study. FEA solutions are verified u...

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...

OBJECTIVE A three-dimensional (3D) finite element analysis (FEA) on the stress distribution of endodontically treated teeth with titanium alloy post and carbon fiber post with different alveolar bone height. MATERIALS AND METHODS The 3D model was fabricated using software to represent an endodontically treated mandibular second premolar with post and restored with a full ceramic crown restora...

In this paper, the fuel pump impeller was selected as a typical airborne equipment for investigation of random vibration fatigue. First, based on platform ANSYS WORKBENCH, reasonable calculation FSI carried out. Then, stress transferred to modal analysis, and prestress-structure extracted. Through response obtained. The Palmgren Miner rule Dirlik fatigue method used calculate life, result consi...

This paper focused on numerical study of hybrid composite specimens, which was experimentally done by preparing according to ASTM standards. Hybrid Composites are the formed by the combination of more than one reinforcement and matrix, which exibits very good properties compared to that of single reinforcement composites. These materials shows better flexibility when comparing with other compos...

Abstract It’s very important to make use of finite element analysis software assist the structure design power battery connector. In this paper, Ansys workbench was used establish electric-thermal coupling model simulation for connector assembly, and temperature field calculation were carried out connectors different thickness under condition high current. The results show that maximum increase...

The three-dimensional model of rare earth permanent magnet synchronous motor is built based on SolidWorks software, the assembly and production explosion diagram are completed. Finally, shaft imported into Workbench interface ANSYS finite element analysis software for harmonic response modal analysis. results show that resonates under action 659.38hz exciting force, displacement value deformati...