The behaviour of an asphalt concrete structure subjected to severe loading, such as blast and impact loadings, is becoming critical for safety and anti-terrorist reasons. With the development of high-speed computational capabilities, it is possible to carry out the numerical simulation of an asphalt concrete structure subjected to blast or impact loading. In the simulation, the constitutive mod...

This study used two types of Recycled Concrete Aggregates (RCAs) with the same original virgin aggregate, but with different amounts of residual mortars. To verify that the mechanical properties of the concrete were affected by changing the unit volume of residual mortar, fresh mortar, and total mortar of the concrete, a series of paving concrete mixes were made using a modified equivalent mort...

creep compliance is one of the fundamental tests of mechanistic- empirical flexible pavement design procedure in the aashto 2002 design guide. in this research, a new artificial neural network model for estimating the hma creep compliance with the generalization ability of r=0.949 has been developed successfully using feed forward multi layer perceptron artificial neural networks (anns) with le...

The conventional French fatigue test has yielded significantly different results for two asphalt materials with the same grade of pure asphalt. A research program was begun to study the influence of the asphalt nature on the fatigue behavior of asphalt materials. The program included full-scale experimentation on the circular test track of the Laboratoire Central des Ponts et Chaussees, laborat...

The new AASHTO Mechanistic–Empirical Pavement Design Guide (MEPDG) provides pavement analysis and performance predictions for various feasible design scenarios. The MEPDG performance predictions for the anticipated climatic and traffic conditions depends on the values of the input parameters that characterize the pavement materials, layers, design features, and condition. This paper focuses on ...

Rubblization is one of the surface preparation techniques before placing a Hot Mix Asphalt (HMA) overlay that involves breaking the Portland Cement Concrete (PCC) pavement into pieces. This paper describes the structural assessment related to the long term performance of rubblized concrete pavements in Iowa. The structural performance of seven representative in-service rubblized concrete paveme...

The stability of asphalt concrete under the effects of freezing and thawing was studied experimentally, and the experimental test results were modelled using fuzzy logic and statistical methods. The stability was investigated experimentally using the Marshall and ultrasound methods. Asphalt core samples 10 cm in diameter were alternately frozen (–20°C for 16 hr) and thawed (16°C for 8 hr) for 5...

Rutting of flexible pavement is considered one of the major pavement distresses noted around the world and in Egypt. Many investigators showed at about 55 to 80% of rutting occurred in the surface layer. Rutting of asphalt surface layer may be due to many causes happened during construction phase and service phase. The main objectives of this research are to evaluate the impact of aggregate gra...

There have been many important developments in road building equipment in recent years; possibly the greatest progress has been made with earth-moving equipment. The size and mobility of earthmoving equipment have been developed to such an extent that pro­ duction has been increased tremendously on the average road con­ struction project. This has had a definite effect on the cost of road work ...