A medium-carbon Si–Mn–Ni–Cr–Mo alloyed (300M) steel was austempered for various short periods at its martensite-starting temperature of 285 °C to seek improved sliding wear resistance as compared the traditional martensitic and bainitic steels. Reciprocating tests were performed against a WC/Co ball counterpart constant load 49 N. The samples characterised using field emission SEM, XRD hardness...

We have performed in situ synchrotron X-ray diffraction experiments to assess the influence of aluminium and phosphorus on the austenite stability in low-alloyed transformation-induced plasticity steels during the high-temperature bainitic holding and the subsequent martensitic transformation during cooling to temperatures between room temperature and 100 K. Although the addition of aluminium i...

The full understanding of the deformation mechanisms in nanostructured bainite requires the local characterization of its mechanical properties, which are expected to change from one phase, bainitic ferrite, to another, austenite. This study becomes a challenging process due to the bainitic nanostructured nature and high Young's modulus. In this work, we have carried out such study by means of ...

In this study, thermal simulation experiments under different austenitization temperatures and different stress states were conducted. High-temperature laser scanning confocal microscopy (LSCM), thermal dilatometry, and scanning electron microscope (SEM) were used to quantitatively investigate the effects of the uniaxial compressive stress on bainitic transformation at 330 ̋C following differen...

For several decades, the question of carbon supersaturation in bainitic ferrite has attracted the attention of physical metallurgists. Originally, this was associated with excess carbon due to the displacive nature ofphase transformation and its subsequent trappingatdefects inbainitic ferrite. The development of advanced experimental techniques, such as atom probe tomography and in situ synchro...

The unique properties of air-cooled bainitic steels have been described. A series of Mn containing air-cooled bainitic steels invented by authors is presented in this paper: including low carbon granular bainitic steels, low carbon grain-boundary allotriomorphic ferrite/granular bainite duplex steels, medium and medium high carbon bainite/martensite duplex steel, and low carbon carbide free bai...

In this study, a multi-element microalloyed GCr15Si1MoNbV bainitic bearing steel was designed by adding trace amounts of Nb and V. The bainite/martensite/retained austenite/undissolved carbide multiphase with short heat-treated cycle remarkable comprehensive mechanical properties prepared via low-temperature austempering, which compared traditional quenched tempered martensitic microstructure. ...

The influence of isothermal treatment prior to the initial quenching step Q&P process was investigated in 0.26C – 4.15Mn 1.39Si steel. Compared microstructure processed steel: a mixture martensite and retained austenite, subjected before (BQ&P) consists bainitic ferrite, austenite. Formation ferrite during refined austenite grain size made filmy morphology prevalent final microstructure. Beside...