Biological nitrogen removal in aerobic granular sequencing batch reactors is sensitively affected by process conditions (e.g. dissolved oxygen (DO) concentration, nitrogen loading rate (NLR), influent C/N ratio, among others). The variation of one of these process conditions affects the others, because often they are tightly linked. These interrelationships are a drawback for the experimental a...

This paper deals with the design of observers for batch processes and the tuning of the observer gains with the objective to guarantee fast convergence of the state estimates. The approach followed in the present proposes to use an ITSE (Integral of the Time-weighted Square Error) criterion. The approach is illustrated on a batch process used in wastewater treatment, sequencing batch reactor (S...

The use of support vector machine (SVM) in all aspects of process engineering activities, such as modeling, design, optimization and control has considerably increased in recent years. Batch reactors mostly used in chemical and pharmaceutical industries. In this paper, a design procedure of support vector machine (SVM) based model identification and control strategy for a batch reactor process ...

Microbial treatment of bis(2-ethylhexyl)phthalate (BEHP) contaminated soil was evaluated in batch and sequencing batch reactors (SBR) using a mixed bacterial culture isolated from a BEHP-contaminated site. The BEHP-degrading mixed culture had three predominant component strains, Bre ibacterium iodinum, Rhodococcus luteus and Bacillus bre is. For soil slurry SBR studies, the hydraulic residence ...

Biocatalytic synthesis in continuous-flow microreactors is of increasing interest for the production of specialty chemicals. However, the yield of production achievable in these reactors can be limited by the adverse effects of high substrate concentration on the biocatalyst, including inhibition and denaturation. Fed-batch reactors have been developed in order to overcome this problem, but no ...

In this work, an investigation has been made in to the performance of latent variable MPC (LV-MPC) in the specific application of reactor temperature control of an exothermic batch process. The paper analyzes the LV-MPC control law derivation and its performance within a batch application. The article considers both constrained and unconstrained applications.

A continuous flow parallel reactor system has been developed to provide a rapid and seamless transition from the discovery phase and production phase of chemical synthesis, particularly in low volume-high value pharmaceuticals production. Using a single fixed bed catalytic meso reactor, reactions can be screened on a small discovery scale over short time scales. The intensified process produces...

A continuous flow sonochemical reactor was developed capable of producing metastable cadmium sulfide (CdS) nanoplatelets with thicknesses at or below 10nm. The continuous flow sonochemical reactor included the passive in-line micromixing of reagents prior to sonochemical reaction. Synthesis results were compared with those from reactors involving batch conventional heating and batch ultrasound-...

Abstract: The selection of a suitable type of reactor for the reaction with enzymes immobilized on the carriers is extremely important to industry. In this study the possibility of using pre-selected cellulose-based carriers (Granocel) to conduct the reaction in a stirred batch reactor and a fixed-bed reactor was investigated. It was shown that non-activated Granocel did not undergo compression...