Increased energy demand and the concern about environment friendly technology, renewable bio-fuels are better alternative to petroleum products. In the present study linseed oil was used as alternative source for diesel engine fuel and the results were compared with baseline data of neat diesel. Performance parameters such as brake thermal efficiency (BTE) and brake specific fuel consumption (B...

This study proposed a novel way for global greenhouse gas reduction through reusing China's waste oil to produce biofuels. Life cycle greenhouse gas mitigation potential of aviation bio-kerosene and biodiesel derived from China's waste oil in 2010 was equivalent to approximately 28.8% and 14.7% of mitigation achievements on fossil-based CO2 emissions by Annex B countries of the Kyoto Protocol i...

The thermal analysis and kinetics of bio-oils derived from swine manure/ crude glycerol co-liquefaction were studied by thermogravimetric analysis (TGA) in the air. It was found that the combustion processes of bio-oils can be divided into three stages, with most of the materials decomposing between 330 and 370°C. In kinetic calculations, oxidation of the bio-oils was determined using the Coats...

Lignocellulosic biomass conversion to produce biofuels has received significant attention because of the quest for a replacement for fossil fuels. Among the various thermochemical and biochemical routes, fast pyrolysis followed by catalytic hydrotreating is considered to be a promising near-term opportunity. This paper reports on experimental methods used 1) at the National Renewable Energy Lab...

Bio-diesel the mono-alkyl esters of vegetable oils can serve as sustainable energy resources alternative to depleting fossil fuels and has gained more importance due to its clean environmental benefits, renewability and biodegradability. The proposed paper highlights the results of experimental investigations on the scope of utilizing biodiesel manufactured from Polanga and Jatropha oils as an ...

Bark is one of the most under-utilized types of lignocellulosic biomass in the forest industry. In this study, bark fast pyrolysis was optimized for phenols yield using response surface methodology (RSM), considering the pyrolysis temperature, gas flow rate, and biomass particle size. The bio-oil generated under optimal conditions was then characterized by gas chromatography-mass spectrometry (...

We report a detailed compositional characterization of a bio-crude oil and aqueous by-product from hydrothermal liquefaction of Nannochloropsis salina by direct infusion Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) in both positiveand negative-ionization modes. The FTICR MS instrumentation approach facilitates direct assignment of elemental composition to >7000 resolv...

Production of renewable commodity chemicals from bio-oil derived from fast pyrolysis of biomass has received considerable interests, but hindered by the presence of innumerable components in bio-oil. In present work, we proposed and experimentally demonstrated an innovative approach combining atmospheric distillation of bio-oil with co-pyrolysis for mass production of renewable chemicals from b...

Recently, the catalytic upgrading of bio-oil to renewable diesel has been attracting more and more attention. In the current paper, carbon nanotube (CNT)-supported nickel catalysts, namely, 5% Ni/CNTs, were prepared for liquid hydrocarbon production through the deoxygenation of palmitic acid, the model compound of bio-oil under a mild condition of 240 ◦C reaction temperature and 2 MPa H2 pressu...

In this study, pyrolysis of microalgal remnants was investigated for recovery of energy and nutrients. Chlorella vulgaris (C.vulgaris) biomass was first solvent-extracted for lipid recovery then the remnants were used as the feedstock for fast pyrolysis experiments using a fluidized bed reactor at 500 o C. Yields of bio-oil, biochar and gas were 53, 31, and 10wt.%, respectively. Bio-oil from C....