Deactivation kinetics of a V/Ti-oxide catalyst was studied in partial oxidation of toluene to benzaldehyde (BA) and benzoic acid (BAc) at 523–573 K. The catalyst consisted of 0.37 monolayer of VOx species and after oxidative pre-treatment contained isolated monomeric and polymeric metavanadate-like vanadia species under dehydrated conditions as was shown by FT Raman spectroscopy. Under the reac...

Niobium oxide as the promoter was doped in the V/WTi catalyst for the selective catalytic reduction (SCR) of NO. The results showed that the addition of Nb2O5 could improve the SCR activity at low temperatures and the 6wt.% additive was an appropriate dosage. The enhanced reaction activity of adsorbed ammonia species and the improved dispersion of vanadium oxide might be the reasons for the ele...

The formation of carbonaceous deposits (coke) in zeolite pores during catalysis leads to temporary deactivation of catalyst, necessitating regeneration steps, affecting throughput, and resulting in partial permanent loss of catalytic efficiency. Yet, even to date, the coke molecule distribution is quite challenging to study with high spatial resolution from surface to bulk of the catalyst parti...

Fluid catalytic cracking (FCC) is the main conversion process used in oil refineries. An X-ray microscopy method is used to show that metal poisoning and related structural changes in the zeolite active material lead to a non-uniform core–shell deactivation of FCC catalyst particles. The study links the detrimental effect of V and Ni poisoning with zeolite destruction and dealumination in a spa...

A Ru-based half sandwich complex used in amine and alcohol racemization reactions was found to be active in the splitting of secondary amines to primary amines using NH3. Conversions up to 80% along with very high selectivities were achieved. However, after about 80% conversion the catalyst lost activity. Similar to Shvo's catalyst, the complex might deactivate under the influence of ammonia. I...

The anode electro-oxidation of methanol is central to the operation of Direct Methanol Fuel Cells (DMFC), which have the potential to become the fastest growing next generation mobile power sources. While Pt and Pt-based catalysts are known for their effectiveness in methanol activation, they are also most susceptible to catalyst poisoning by reaction intermediates such as CO. A second or even ...

the olefins polymerization process in a slurry reactor is discussed. the reaction rate dynamics was analyzed and the contributions of feed flow, gas-liquid mass transfer, polymerization reaction, and catalyst deactivation were estimated. the propylene solubility in a solvent mixture “heptane” was calculated using soave-redlich-kwong equation of state. these data were then approximated by henry-...

CO2 methanation has been evaluated as a means of storing intermittent renewable energy in the form of synthetic natural gas. A range of process parameters suitable for the target application (4720 h-1 to 84 000 h-1 and from 160oC to 320oC) have been investigated at 1 bar and H2/CO2 = 4 over a 10 % Ru/γ-Al2O3 catalyst. Thermodynamic equilibrium was reached at T ≈ 280oC at a GHSV of 4720 h-1. Cyc...