A dynamic model for the concentration admittance of a polymer electrolyte fuel cell is presented. The takes into account oxygen transport in cathode channel, gas diffusion layer, and catalyst layer. An analytical solution derived. We observe that at air channel outlet not affected by faradaic reactions, it contains information on coefficients cell. measured can be fitted using formula obtained ...

Microbial fuel cells (MFCs) represent a promising technology for simultaneous bioelectricity generation and wastewater treatment. Catalysts are significant portions of the cost of microbial fuel cell cathodes. Many materials have been tested as aqueous cathodes, but air-cathodes are needed to avoid energy demands for water aeration. The sluggish oxygen reduction reaction (ORR) rate at air catho...

Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Petri Kanninen Name of the doctoral dissertation Characterization of nanostructured catalysts and silicon microstructures in polymer electrolyte membrane fuel cells Publisher School of Chemical Technology Unit Department of Chemistry Series Aalto University publication series DOCTORAL DISSERTATIONS 76/2014 Field of research Ph...

Direct methanol fuel cells (DMFCs) hold great promise for applications ranging from portable power for electronics to transportation. However, apart from the high costs, current Pt-based cathodes in DMFCs suffer significantly from performance loss due to severe methanol crossover from anode to cathode. The migrated methanol in cathodes tends to contaminate Pt active sites through yielding a mix...

A redox-reversible iron orthovanadate cathode is demonstrated for a solid oxide electrolyser with up to 100% current efficiency for steam electrolysis. The iron catalyst is grown on spinel-type electronic conductor FeV2O4 by in situ tailoring the reversible phase change of FeVO4 to Fe+FeV2O4 in a reducing atmosphere. Promising electrode performances have been obtained for a solid oxide steam el...

Due to the high cost of polymer electrolyte fuel cells (PEFCs), replacing platinum (Pt) with some inexpensive metal was carried out. Here, we deposited palladium nanoparticles (Pd-NPs) on nanoporous carbon (NC) after wrapping by poly[2,2'-(2,6-pyridine)-5,5'-bibenzimidazole] (PyPBI) doped with phosphoric acid (PA) and the Pd-NPs size was successfully controlled by varying the weight ratio betwe...

While problems related to CO poisoning still exist for the anode, most of the efficiency loss (80%) in a fuel cell arises due to the cathode. Oxygen reduction at the cathode requires the largest amount of the catalyst in PEM fuel cells due to its lower activity. This problem needs to be solved before mass commercialization of fuel cells can be achieved. The specific objective is to synthesize n...

We have prepared and characterized a SnO2-decorated Pt-Sn(oxidized)/C cathode catalyst in a polymer electrolyte fuel cell (PEFC). Oxygen reduction reaction (ORR) performance of Pt/C (TEC10E50E) remained almost unchanged or even tended to reduce in repeated I-V load cycles, whereas the I-V load performance of the Pt-Sn(oxidized)/C prepared by controlled oxidation of a Pt-Sn alloy/C sample with t...