The flow velocity distribution in partially-filled circular pipe was investigated in this paper. The velocity profile is different from full-filled pipe flow, since the flow is driven by gravity, not by pressure. The research findings show that the position of maximum flow is below the water surface, and varies with the water depth. In the region of near tube wall, the fluid velocity is mainly ...

The aim of this study was to demonstrate the feasibility of laparoscopic restorative proctocolectomy (LRPC) without additional abdominal incisions. Two sisters with familial adenomatous polyposis were enrolled. The colon and rectum were mobilized entirely through the five abdominal trocars. The terminal ileum and distal rectum were transected with endoscopic staplers. The entire colorectal spec...

Swirling flows are related to the spiral motion in the tangential direction in addition to the axial and radial direction using several swirl generators. These type of flows are used in combustion chambers to improve flame stability, heat exchanger to enhance heat transfer coefficients, agricultural spraying machines and some vertical pipes to move slurries or transport of materials. However, o...

Flow in a circular pipe fitted with segmental baffles may be treated as a shellwithout-tube system. Its pressure drop has been calculated by adapting the Kern correlation [1] for pressure drop in the shell side of shell-and-tube heat exchangers. The Kern correlation is essentially based on the Hagen – Poiseuille equation for laminar flow, but flow visualization results presented here show that ...

The shear augmented dispersion of solutes in blood flow i through circular tube and ii between parallel flat plates is analyzed mathematically, treating blood as Herschel-Bulkley fluid model. The resulting system of nonlinear differential equations are solved with the appropriate boundary conditions, and the expressions for normalized velocity, concentration of the fluid in the core region and ...

The aim of this study is to experimentally investigate the effect of the coiled wire insertions on dynamic instabilities and to compare the results with the smooth tube for forced convection boiling. The experiments were conducted in a circular tube, and water was used as the working fluid. Two different pitch ratios (H/D = 2.77 and 5.55) of coiled wire with circular cross-sections were utilise...