During the recent years, a significant amount of research has been performed on single-walled carbon nanotubes (SWCNTs) as a channel material in thin-film transistors (Pham et al. IEEE Trans Nanotechnol 11:44-50, 2012). This has prompted the application of advanced characterization techniques based on combined atomic force microscopy (AFM) and Raman spectroscopy studies (Mureau et al. Electroph...

1. Introduction Flexible and transparent field-effect transistors (FETs) based on organic or inorganic materials are now one of the most attractive research objects because they have potential to bring innovation in conventional electronic device systems. Recently, high-performance flexible integrated circuits using carbon nanotube thin-film transistors (CNT-TFT) have been developed [1-3]. Thes...

Title of Document: EXPLORATION OF NOVEL METHODS FOR THE FABRICATION AND CHARACTERIZATION OF ORGANIC FIELD-EFFECT TRANSISTORS AND EXAMINATION OF FACTORS INFLUENCING OFET PERFORMANCE Adrian Southard, Doctor of Philosophy, 2009 Directed By: Professor Michael S. Fuhrer, Department of Physics This thesis explores novel methods for fabricating organic field effect transistors (OFETs) and characterizi...

We have established a fabrication process for conductive carbon nanotube (CNT) tips for multiprobe scanning tunneling microscope (STM) with high yield. This was achieved, first, by attaching a CNT at the apex of a supporting W tip by a dielectrophoresis method, second, by reinforcing the adhesion between the CNT and the W tip by electron beam deposition of hydrocarbon and subsequent heating, an...

A simple layer-by-layer (LBL) electrostatic adsorption technique was developed for deposition of films composed of alternating layers of positively charged poly(diallyldimethylammonium chloride) (PDDA) and negatively charged multiwall carbon nanotubes bearing platinum nanoparticles (Pt-CNTs). PDDA/Pt-CNT film structure and morphology up to six layers were characterized by scanning electron micr...

Over the past decade, many applications were intended for filtration by membrane technology especially the thin film composite (TFC) membranes. In advanced developments of thin film membranes, an attempt was made to spread a new generation of membranes called thin film nano composite (TFN) membranes. However, in the last generation of TFNs, an ultrathin selective film of nanoparticles is coated...

We report a method for controlling the orientations of conjugated polymers in the active layer of organic thin-film transistors (OTFTs) by annealing the film at the melting temperature in a vertically aligned multiwalled carbon nanotube (VA-CNT) template under various load pressures. Poly(3-hexylthiophene) [P3HT] molecules are effectively aligned in the melting state annealing at 240 °C for 30 ...

Abstract: Different thickness of Cu2S thin films were prepared by vacuum evaporation under a pressure of 10-6 torr at an evaporation rate of 3Å /sec. Cu2S has direct band gap energy and indirect band gap energy at 1.2eV and 1.8 eV respectively. This paper presents the analysis of structural and optical properties of the Cu2S thin film by X-ray diffractometer (XRD) and UV-Vis-NIR Spectrophotomet...

titanium nitride-copper (tin-cu) nanocomposite films were deposited onto stainless steel substrate using hollow cathode discharge ion plating technique. the influence of cu content in the range of 2-7 at.% on the microstructure, morphology and mechanical properties of deposited films were investigated. structural properties of the films were studied by x-ray diffraction pattern. topography of t...