This paper provides a general introduction to welding fundamentals (section 2) followed by sections on a few selected welding processes that have had significant developments or improvements over the last few years. The processes that are discussed are friction welding (section 3), hot plate welding (section 4), ultrasonic welding (section 5), laser/IR welding (section 6), RF welding (section 7...

The set of diffractive optical elements for CO2 and Nd-Yag lasers was theoretically calculated, fabricated by microlithographic technology and experimentally tested. It is shown that the laser systems for therapy, surgery and welding gain from advanced capabilities of the DOEs: uniform focal-spot intensity, simultaneous formation of focal line contours, sharp and multiple-spot focusing, dual-wa...

Laser welding is a widely used but complex industrial process. In this work, we propose the use of an integrated machine intelligence architecture to help address the significant control difficulties that prevent laser welding from seeing its full potential in process engineering and production. This architecture combines three contemporary machine learning techniques to allow a laser welding c...

the use of twb has been developed in automotive industries because of it’s advantages such as reduction in weight, cost and fuel economy of vehicles. the main objective of the peresent work is to study the effects of weld zone, diffrence in surface coating and thickness ratio on the formability of twb composed of aisi 304, spcc and if steel sheets. it was found that the narrow weld zone has lit...

Stationary and moving plane heat source analysis have application in several manufacturing processes such as metal cutting, spot welding, laser cutting/surface treatment (using CO2 or Argon lasers) as well as tribological applications including ball bearing and gear design [1-5]. Temperature profile and the rate of cooling at and near the surface can affect the metallurgical microstructures, th...

Laser welding is an advance non-traditional and high energy beam welding technique for dissimilar material, which is being increasingly used in industries like automobile, nuclear reactors, aerospace etc. Again it is a very tough task to joining dissimilar materials due to their properties variation. In this present work two dissimilar metals such as copper and AISI 304 stainless steel are take...

introduction: epulis fissuratum is often formed as a result of a poor fitting denture. the conventional treatment for this fibrous hyperplastic tissue is to excise it using a scalpel and to close the wound by a continuous or an interrupted suture. the increased utilization of lasers in dentistry also includes the utilization of carbon dioxide (co2) lasers in place of surgical scalpels in soft t...

Femtosecond (fs) laser irradiation has been shown to be effective for welding transparent materials and for transparent materials to metals. However, to date there is little work regarding similar applications in welding/bonding of metals. In this article, we for the first time to the best of our knowledge report on fs laser-induced microwelding of Ag microwires and Cu substrates. The influence...

Minor problems arising from optimizations by welding of fixed prostheses frameworks can be identified by macroscopic and microscopic visual inspection. The purpose of this study was to highlight the visible discontinuities present in the laser welds of dental Ni-Cr alloys. Ni-Cr base metal alloys designated for fixed prostheses manufacture were selected for the experiments. Using cast plates, p...