An investigation of macrobending loss characteristics of a standard singlemode fiber (SMF28) for small bend radii is presented theoretically and experimentally, which includes the bend loss of the SMF28 with coating layers and the bare SMF28 after stripping the coating layers and chemical etching of partial cladding. The significant influence of reflection occurring at the interface between the...

The sensor characteristics of a coated Fiber Bragg grating (FBG) thermal sensor for cryogenic temperatures depends mainly on the coating materials. The sensitivity of the coated FBG can be improved by enhancing the effective thermal strain transfer between the different layers and the bare FBG. The dual coated FBG’s has a primary layer and the secondary layer. The primary coating acts as an int...

The coating of plastics for optical applications is intended to improve the mechanical durability of soft polymers and to serve an antireflection function. Usually a classic four-layer antireflection system is added on top of a single-layer hard coating. With needle optimization, an alternative coating design has been developed. The design is characterized by thin high-refractive-index layers t...

BN nanotubes are coated with SnO(2) by a simple chemical reaction in solution. BN nanotubes are stirred inside a SnCl(2) solution at room temperature for 1 h. The coating is uniform with complete coverage. The coating thickness is typically 1-5 nm. The coating layer contains SnO(2) nanoparticles with sizes ranging from 1 to 5 nm.

Floating dosage forms with prolonged gastric residence time have garnered much interest in the field of oral delivery. However, studies had shown that slow and incomplete release of hydrophobic drugs during gastric residence period would reduce drug absorption and cause drug wastage. Herein, a spray-coated floating microcapsule system was developed to encapsulate fenofibrate and piroxicam, as m...

Superoleophobic surfaces are of interest for anti-fouling, self-cleaning, anti-smudge, low-drag, anti-fog, and oil-water separation applications. Current bioinspired surfaces are of limited use due to a lack of mechanical durability. A so-called layer-by-layer approach, involving charged species with electrostatic interactions between layers, can provide the flexibility needed to improve adhesi...

The corrosion protection of mild steel by a newly developed epoxy-based coating system containing inherently conducting nanopolyaniline-clay as a nanoadditive has been studied. Polyaniline-clay anticorrosion nanoadditive (PCNA) was obtained by the direct mixing method of nanopolyaniline (0.03 wt.%) and organo-modified clay (3 wt.%) at atmospheric pressure, and XRD technique was used to study d-...