background: as various implant geometries present different biomechanical behaviors, the purpose of this work was to study stress distribution around tapered and cylindrical threaded implant geometries using three-dimensional finite element stress analysis.     methods: seven implant models were constructed using the cad system. after digitized models of mandibular section, the crowns were crea...

A facile method is developed to fabricate nanocomposite double-network (DN) gels with excellent mechanical properties, which do not fracture upon loading up to 78 MPa and a strain above 0.98, by compositing of carbon nanotubes (CNTs) without organic modification. Investigations of swelling behaviors, and compressive and tensile properties indicate that equilibrium swelling ratio, compressive mo...

Magnetostrictive tunnel magnetoresistance (TMR) sensors pose a bright perspective in micro- and nano-scale strain sensing technology. The behavior of TMR sensors under mechanical stress as well as their sensitivity to the applied stress depends on the magnetization configuration of magnetic tunnel junctions (MTJ)s with respect to the stress axis. Here, we propose a configuration resulting in an...

The axial compressive strength of unidirectional FRP made by pultrusion is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. A theoretical iterative calculation approach was suggested to predict the ultimate axial compressive stress of the combined structure and analyze the influences of geometr...

The effects of strain rate and low-gamma irradiation on the compressive properties of ultra-high molecular-weight polyethylene (UHMWPE) were investigated. Gamma irradiation was performed at 30 kGy in nitrogen or at 29 kGy in air without post-irradiation treatment. Quasi-static and impact compressive tests using the split-Hopkinson pressure-bar technique were performed to measure stress-strain r...

Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...

Tensegrity is a light weight deployable structure that is composed of compressive and tensile members. However, the compressive members, which are made of common metallic structural materials, are not mass-efficient. In this paper, we replace the compressive member with “self-similar” tensegrity structure that has same strength but less mass. We start with a non-tensegrity structure called C4T ...

ABSTRACT: The mechanical parameters of constitutive equations for soil and rock can be determined by laboratory experiments in which a cylindrical specimen is commonly tested under uniaxial and triaxial compressive conditions. The distribution of stress in the specimen during the tests must be kept uniform and homogeneous. In this paper, numerical simulations are carried out to determine the di...

Residual stresses in TiN coatings deposited by a reactive ion process on Haynes 188 superalloy, for potential application in jet engines, were determined over the temperature range from 30–800 °C, using high temperature X-ray diffraction. In the as-coated condition the TiN films have a pronounced [111] orientation texture and a compressive room temperature stress of -10.5 GPa. After heating for...

This paper investigates the effects of unequal compressive and tensile moduli of carbon fibre reinforced plastic (CFRP) composites. The basic assumption is based on the statistics that the compressive modulus is a fraction lower than the tensile modulus. Data evaluated by Finite Element Analysis (FEA) model, Classical Laminate Theory (CLT) model, and experiment are used to investigate these eff...