Corrosion behaviour of copper has been investigated in different compositions of formic acid and acetic acid at 30°C by a potentiostatic method. The maximum corrosion rate was found in 2&40mol/o formic acid and in 20 mol/o acetic acid in aqueous solution mixtures. The corrosion rate depended on the concentration of either acid. Formic acid is observed to be more corrosive than acetic acid. The ...

Corrosion products on three bronze swords found in tombs dating from the Warring States period at Lijiaba site, Yunyang county, Chongqing were characterized by Raman and X-ray fluorescence spectroscopies. The major corrosion products were cuprite, malachite, cerussite and cassiterite, along with the copper and lead phosphates, libethenite and pyromorphite. The presence of libethenite and pyromo...

Zr70−xCu12.5Ni10Al7.5Agx (x = 0–10) bulk metallic glasses (BMGs) have been prepared by copper mold casting. The glass-forming ability (GFA) and corrosion behavior of Zr-based BMGs have been investigated. It is found that the GFA of Zr-based BMGs first increases and then decreases with the increase of the Ag content, and the best glass former is Zr65Cu12.5Ni10Al7.5Ag5 with the maximum thickness ...

Within ongoing work, Canada’s Nuclear Waste Management Organization (NWMO) is demonstrating that copper coatings can be developed as viable corrosion barriers for used fuel nuclear containers, emplaced in a deep geological repository. As a means of assessing container design and feasibility, coated samples, manufactured via cold spray and electrodeposition have been produced and characterised. ...

fication Corrosion monitoring by resistivity measurement was used to assess the environmental conditions in cultural heritage institutions, with the aim to provide advice on the preservation conditions in museums, showcases or storage areas. Changes in corrosion depth of thin copper sensors were followed during a year. The results of studies in 13 museums, libraries and archives are presented. ...

Copyright © Korean Carbon Society http://carbonlett.org Abstract We have demonstrated the production of thin films containing multilayer graphene-coated copper nanoparticles (MGCNs) by a commercial electrodeposition method. The MGCNs were produced by electrical wire explosion, an easily applied technique for creating hybrid metal nanoparticles. The nanoparticles had average diameters of 10–120 ...

The literature dealing with the electrochemical corrosion of copper and possibility of its prevention using inhibitors is examined. Inorganic compounds are investigated as well, but organic compounds and their derivatives in much greater numbers. Researches are directed to influence of compounds structure, concentration, method of application as well as media that inhibitor is used in on inhibi...

To improve the corrosion protection of copper metal, 0.01M concentration of 1H-1,2,4-triazole-3-thiol (TAT) was incorporated into the hybrid sol-gel monolayers containing 3-glycidoxypropyltrimethoxysilane (GPTMS) and Tetraethoxysilane (TEOS). It was further subjected to hydrolysis and condensation reaction to form a sol-gel matrix. The TAT-doped hybrid sol-gel coating was applied over the c...

Pure cobalt coatings were electrodeposited on copper substrate by means of direct electric current in a chloride solution at different current densities in the range of 10-70 mA cm -2 . The surface morphology and microstructure were investigated via X-ray diffraction analysis and scanning electron microscopy. Corrosion behavior of cobalt coatings was also studied in a 3.5 wt% NaCl soluti...