issues. These include the material employed in the reactor walls, the cladding material for the fissile nuclear fuel, and the material used for retaining the fission products. In addition to long term resistance to irradiation, the materials used in a nuclear reactor must have excellent mechanical and corrosion properties in order to tolerate the thermal shocks as well as the high temperature a...

The generation of particles in gas handling systems as a result of corrosion is a major concern in the microelectronics industry. The corrosion can be caused by the presence of trace quantities of water in corrosive gases such as HCl or HBr. Presently there are several commercial instruments that are capable of detecting trace water vapor with detection limits as low as 50 ppb in N2. However, n...

The effects of corrosive media on rotating bending fatigue lives (the cyclic numbers from 104 to 108) of different aluminum alloys were investigated, which involved the corrosion fatigue lives of five kinds of aluminum alloys in air, at 3.5 wt. % and 5.0 wt. % NaCl aqueous solutions. Experimental results indicate that corrosive media have different harmful influences on fatigue lives of differe...

Introduction It is critical for power plants to continuously monitor corrosive ionic impurities in various plant water streams, such as cooling waters, boiler waters, feed waters, and steam condensates. The presence of impurities above a specified concentration can result in stress-corrosion cracking and other corrosion mechanisms, and therefore have a significant negative impact on power gener...

The ingestion of corrosive agents frequently produces adverse effect on the esophagus and the stomach or on both. Agents of alkaline pH usually result in esophageal injury, and agents of acid pH often cause gastric damage. Squamous epithelium lining the esophagus is sensitive to alkaline agents; however, alkaline agents upon reaching the stomach are rapidly neutralized by the gastric acidity of...

The phenomenon of corrosion in metallic materials such as 316 stainless steel (316SS), produce a degradation which is mainly represented by the lost of metallic properties. One way to study this phenomenon is analyzing microscope digital images of materials exposed to corrosive processes, and the analysis of electrochemical signals using electrochemical noise measurements. The traditional techn...

Current treatment strategies against the development of corrosive esophageal strictures remain unsatisfactory. Thus, the aim of the present study was to investigate the efficacy of keratinocyte growth factor, in the form of palifermin, for the prevention of stricture development following esophageal caustic injuries in a rat model. A total of 32 female Wistar albino rats were divided into four ...

Polymer science and technology has flourished as polymers with many new compositions have been, synthesized. The range of properties attainable has been continually extended, providing materials with higher strength, better reinforcing capabilities, and greater resistance to extreme thermal and corrosive environments. Examples of evolutionary developments in the polyamides, the fluorocarbon res...