An anisotropic model of damage mechanics for ductile fracture incorporating the endochronic theory of plasticity is presented in order to take into account material deterioration during plastic deformation. An alternative form of endochronic (internal time) theory which is actually an elasto-plastic damage theory with isotropicnonlinear kinematic hardening is developed for ease of numerical com...

Molecular dynamics (MD) simulations are used to directly observe nucleation of median cracks in oxide glasses under indentation. Indenters with sharp angles can nucleate median cracks in samples with no pre-existing flaws, while indenters with larger indenter angles cannot. Increasing the tip radius increases the critical load for nucleation of the median crack. Based upon an independent set of...

The effect of V-notches or reentrant corners on fracture propagation has been analyzed for brittle materials, but not for quasibrittle materials such as concrete, marked by a large material characteristic length producing a strong size effect transitional between plasticity and linear elastic fracture mechanics. A simple size effect law for the nominal strength of quasibrittle structures with s...

Joints and fissures in natural rocks have a significant influence on the stability of the rock mass, and it is often necessary to evaluate strength failure and crack evolution behavior. In this paper, based on experimental tests and numerical simulation (PFC2D), the macro-mechanical behavior and energy mechanism of jointed rock-like specimens with cross non-persistent joints under uniaxial load...

In this study, we investigated a method for the non-destructive detection of cracks based on an ultrasonic transit timing method. This method is considered to be an effective means for crack monitoring over an extensive coverage area. Aluminum specimens were prepared with a range of crack sizes and subjected to a tone burst wave to investigate the relationship between crack depth and the transi...

Chipping in glass plates from line-wedge contact loading is studied as function of the wedge’s subtended angle 2β, its inclination angle φ, and the distance h from a corner having a subtended angle 90◦−θ . A brittle-fracture analysis in conjunction with the FEM technique is used to elucidate the role of geometric variables on chip morphology and chipping load. Closedform relations are developed...

There are few experimental results to date describing the crack-propagation threshold behavior of short fatigue cracks under multiaxial loading conditions. To address this need, in the present study, the variation in mixed-mode, high-cycle fatigue-crack growth thresholds with crack size and shape are reported for a Ti-6Al-4V turbine blade alloy, heat treated to two widely different microstructu...

The structure of human cortical bone evolves over multiple length scales from its basic constituents of collagen and hydroxyapatite at the nanoscale to osteonal structures at near-millimeter dimensions, which all provide the basis for its mechanical properties. To resist fracture, bone's toughness is derived intrinsically through plasticity (e.g., fibrillar sliding) at structural scales typical...

There are few experimental results to date describing the crack-propagation threshold behavior of short fatigue cracks under multiaxial loading conditions. To address this need, in the present study, the variation in mixed-mode, high-cycle fatigue-crack growth thresholds with crack size and shape are reported for a Ti-6Al-4V turbine blade alloy, heat treated to two widely different microstructu...

In 2004, a team comprised of researchers and service providers launched the Safer Crack Use, Outreach, Research and Education (SCORE) project in the Downtown Eastside of Vancouver, British Columbia, Canada. The project was aimed at developing a better understanding of the harms associated with crack cocaine smoking and determining the feasibility of introducing specific harm reduction strategie...