The effect of cutting parameters and tool parameters on cutting forces and tool wear were investigated in high density fiberboard (HDF) peripheral up-milling using toughened ceramic cutting tools. The results showed that whether at low speed cutting or high speed cutting, the tangential forces Ft and normal forces Fr increased slowly with the increase of cutting length. The tangential forces Ft...

The mechanics of the cutting process on the microscopic level differ fundamentally from the conventional macro cutting. For example, the tool edge radius influences the cutting mechanism in micro machining significantly with regard to the effective rake angle, the minimum chip thickness, the dominance of ploughing, and the related elasto-plastic deformation of the workpiece material. These phen...

A field experiment was conducted to evaluate the crop water stress index (CWSI), grain yield and canopy temperature of triticale under two irrigation regimes at Research Station of College of Agriculture and Natural Resources of Darab, Shiraz University, in 2013. A split plot design was used with three triticale cultivars (Sanabad, ET-83-3, and ET-84-5), as sub-plots and four levels of irrigati...

one of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. as a result, the tool would be worn and its life time would be reduced. therefore, in long time machining, it is essential to change inserts and tools, continiously. a milling tool with self rotary cutting inserts was designed and manufactured that enables i...

the built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. the built up layer (bul) is formed in second deformation zone near the tool-chip interface in the back of the chip. this parameter influences the tool life and machined surface quality. this bul should not be confused with the built up edge (bue). the deformation of the bul in...

Existing corn harvester cutting blades have problems associated with large cutting resistance, high energy consumption, and poor cut quality. Using bionics principles, a bionic blade was designed by extracting the cutting tooth profile curve of the B. horsfieldi palate. Using a double-blade cutting device testing system, a single stalk cutting performance contrast test for corn stalks obtained ...

this paper presents the findings of experimental investigations into the effects of cutting speed, feed rate, depth of cut and approach angle on the machinability of titanium (grade-5) alloy. also the comparison for the two different cutting materials inserts polycrystalline diamond (pcd) and cubic boron nitride (cbn) with similar tool geometry for similar machining parameters is also carried o...

in this paper we present a new method for tool-path generation and adaptive interpolation for a three-axis cnc milling machine. this method satisfied the force and / or the error conditions by using a variable-direction variable-feedrate strategy based on maximum feedrate map. the proposed adaptive interpolator modifies the cutting path and the moving direction according to the actual instantan...

One of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. As a result, the tool would be worn and its life time would be reduced. Therefore, in long time machining, it is essential to change inserts and tools, continiously. A milling tool with self rotary cutting inserts was designed and manufactured that enables i...