نتایج جستجو برای: directional solidification
تعداد نتایج: 41540 فیلتر نتایج به سال:
In our previous work, we obtained the uniformly valid asymptotic solution of a cylindrical rod eutectic. order to further study critical point stable growth eutectic, have considered unsteady eutectic on basis steady Based experimental system growth, combined with solidification thermodynamics and kinetics, mathematical model was established. We used analysis method seek analytical nonlinear st...
Directional solidification experiments on hypoperitectic Cu–Sn alloys have been performed at very low velocity in a high thermal gradient to ensure planar front growth of both phases. The diameter of the sample has been reduced to 500 lm to strongly reduce convection. Lamellar and fibrous peritectic cooperative growth of the primary aand peritectic b-phases has been observed on length spanning ...
A directional solidification technique was developed and applied to the problem of fractional crystallization of an iron meteorite parent body. Samples of Fe-Ni alloys close to meteorite compositions and containing S, P, and C were made. The solidified structures contain secondary phases such as sulphides within the proeutectic single crystal austenite (taenite). As a result of these experiment...
The deformation of a directionally solidified columnar dendritic mushy zone in a transparent succinonitrile-acetone (SCN-ACE) alloy has been studied experimentally. In addition to solidifying dendritically like a metal alloy, this alloy also has mechanical properties that are similar to those of metals near the melting point. The experiments are relevant, for example, to the deformation of a pa...
We report experimental results on quasi-two-dimensional diffusion limited growth in directionally solidified succinonitrile with small amounts of poly(ethylene oxide), acetone, or camphor as a solute. Seaweed growth, or dense branching morphology, is selected by growing grains close to the [111] plane, where the in-plane surface tension is nearly isotropic. The observed growth morphologies are ...
Sn-3.7wt.%Ag-0.9wt.%Zn alloy was directionally solidified upward under different conditions, with different growth rates (V = 3.38 220.12 μm/s) at a constant temperature gradient (G = 4.33 K/mm) and with different temperature gradients (G = 4.33 -12.41 K/mm) at a constant growth rate (V = 11.52 μm/s) by using a Bridgman-type directional solidification furnace. The microstructure was observed to...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید