One of the problems in the case of stainless steels is their low corrosion resistance against pitting corrosion in chloride containing environments, thereby leading to severe damage to industries. In this research, the pitting corrosion of 304 austenitic stainless steel was studied in 3.5% NaCl solution at room temperature (25˚C) by performing electrochemical measurements (containing cyclic pol...

The protection influence of three sulfa guanidine azo derivatives against nickel corrosion was studied in 0.5 M HCl solutions at 25oC. Measurements were conducted under various experimental conditions using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. These studies have shown that sulfa guanidine azo deriva...

Organic corrosion inhibitor is one of lower cost technologies that limit the deterioration of concrete structures. The influence of a newly prepared organic corrosion inhibitor on the corrosion behavior of carbon steel in simulated concrete pore solution was investigated by polarization curves, electrochemical impedance spectroscopy, and so on. The effect of organic corrosion inhibitors on conc...

An overview is given of the anomalous behavior of some metals, in particular Fe and Cr, in acidic aqueous solutions during anodic dissolution. The anomaly is recognizable by the fact that during anodic dissolution more material dissolves than would be expected from the Faraday law with the use of the expected valence of the formed ions. Mechanical disintegration, gas bubble blocking, hydrogen e...

A model has been developed for calculating the rates of general corrosion of carbon steel and 13%Cr steel in aqueous systems containing carbon dioxide, hydrogen sulfide and other components. The model combines a comprehensive thermodynamic speciation module with electrochemical computations based on the mixed-potential theory. The electrochemical calculations recognize the effects of various pa...

A new anti-corrosion compound, Melamine Formaldehyde (MF), was formulated by the addition of proper amount of formaldehyde to melamine under specific conditions. This compound was mixed with a novel nano powder, which was extracted from corn cob ash containing SiO2 particles, in order to improve its corrosion inhibition efficiency. This inhibitor provides a high level of protection f...

In recent years, the corrosion of steel reinforcement has become a major problem in the construction industry. Therefore, much attention has been given to developing methods of predicting the service life of reinforced concrete structures. The progress of corrosion cannot be visually assessed until a crack or a delamination appears. The corrosion process can be tracked using several electrochem...

In this study, the synergistic effects of abrasion and corrosion on UNS S30403, S31603 and S32760 stainless steels have been investigated using micro-abrasion test rig. The stainless steel samples have been studied under both pure abrasion (PA) and abrasion–corrosion (AC) conditions imulated by using silicon carbide based slurries in either distilled water or 3.5% sodium chloride solutions. Tes...

Corrosion, from long time before was a greatest problem in oil and gas industry and experts have always tried to combat this major problem. This has been given to the corrosion and inspection in oil and gas industry. Corrosion in oil and gas wells has the electrochemical mechanism, When the system reaches a temperature below the dew point, moisture is converted to liquid and many droplets occur...

Arc thermal metal spray coating provides excellent corrosion, erosion and wear resistance to steel substrates. This paper incorporates some results of aluminum coating applied by this method on plain carbon steel. Thereafter, coated panels were exposed to an environment known to form stable corrosion products with aluminum. The coated panels were immersed in Society of Automotive Engineers (SAE...