The purpose of this research was to experimentally characterize the flexural and tensile characteristics of fiber-reinforced Very High-Strength Concrete (VHSC) panels. The panels were made with a unique mix of cementitous materials achieving compressive strength of 26,000 psi (180 MPa) or greater. VHSC panels were reinforced with polypropylene fibers of 1 inch (25.4 mm) in length and Polyvinyl ...

A nanocomposite containing polypropylene (PP) and nano α-Al2O3 particles was prepared using a Haake internal mixer. Mechanical tests, such as tensile and flexural tests, showed that mechanical properties of the composite were enhanced by addition of nano α-Al2O3 particles and dispersant agent to the polymer. Tensile strength was approximately ∼ 16% higher than pure PP by increasing the nano α-A...

Electrically conductive polymer composites are suitable for use in the manufacture of antistatic products and components for electronic interconnects fuel cells and electromagnetic shielding. Selective laser sintering (SLS) was used to investigate the fabrication of electrically conductive nanocomposites of Nylon-12 filled with 4% by weight of carbon black. The effect of laser power and the sca...

Environment-friendly “green” nanocomposites were fabricated from a starch-based, dispersion-type biodegradable resin and cellulose nanofibers. The mixture of the dispersion-type biodegradable resin and cellulose nanofibers were blended well by using a mixer and/or a stirrer. Composites were prepared by conventional hot pressing at a constant temperature of 140oC and at pressures from 10 to 50 M...

The aim of the present study was to evaluate the fracture resistance of teeth restored with resin composite. Forty-eight maxillary premolar teeth were chosen and randomly divided to six groups: G1 (control): sound teeth; G2: MOD preparation, unrestored; G3: MOD + Adper Single Bond 2/P60; G4: MOD + Adper Easy One/P60; G5: MOD + P90 restorative system; G6: MOD + Adper Easy One/P90 Bond/P90. Speci...

The aim of this study was to evaluate the viscoelastic properties of novel low-shrinking composites and compare them to those of packable composites. Six materials were tested: Clearfil Majesty Posterior (CM), ELS Extra Low Shrinkage (EL), Filtek P60 (FP), Filtek Silorane (FS), Prodigy (PR) and Surefil (SU). Static and dynamic testing was performed and materials were tested dry and wet at diffe...

This pctpcr focuses on the use of externally bonded high modulus carbon fiber reinforced polymer (HM CFRP) materials to strengthen steel bridges and st ructures. Proper installation of the CFRP materials is necessary to prevent premature failure due to debondi ng. The paper proposes guidelines and installation techniques based on the best practice reported in the literature and the extensive pr...

Thiol-ene photopolymerizations gain a growing interest in academic research. Coatings and dental restoratives are interesting applications for thiol-ene photopolymerizations due to their unique features. In most studies the relative flexible and hydrophilic ester derivative, namely pentaerythritoltetra(3-mercaptopropionate) (PETMP), is investigated as the thiol component. Thus, in the present s...

OBJECTIVES to complement our previous work by testing the null hypotheses that with short curing times and high DC, TPO-based resin composites would exhibit (1) higher polymerization stresses and consequently display (2) higher temperature rise and (3) higher flexural modulus, flexural strength and hardness, compared to a conventional CQ-based experimental composite. METHODS Two experimental ...