−− The adsorption process of Nickel and Vanadium dissolved in acid liquor on lignin is studied in this work. Different adsorption isotherm models are used to adjust liquid-solid systems: Langmuir, Freundlich and Redlich-Peterson. It was obtained that the metal adsorption using lignin proceeds by similar chemical mechanisms. Possibly the Nickel is adsorbed in heterogeneous monolayers, contrary t...

Biosorption is most economical method for removing toxic metals from waste water.The paper presents the results of studies carried out on sorption of zinc ions from aqueous solutions by a coffee industry waste s a low-cost sorbent. It was found that crushed coffee industry waste possess relatively high sorption capacity as 46.05 mg/g, when comparing with other sorbents. The biosorption studies ...

In this study, waste olive cake (OC) was utilized as the raw material for the production of biosorbents by chemical treatment and its adsorption capacity for zinc ion was evaluated. Tests were conducted with the total biomass (T) and with the fraction > 2.00 mm (P), in order to determinate the influence of this fractionation step on subsequent treatments. Two chemical agents were used: sulfuric...

The following study demonstrates the possibility of producing different activated carbons from a mixture of waste tires and tubes. The mixture was pyrolyzed at different temperatures namely (400,450 and 500 о C) for two hours for the determination of best condition of heating. It was found through the study that semi carbonized marital produced via pyrolyis at 500 о C was the best; thus it was ...

Removal thermodynamics and desorption studies of some heavy metal ions such as Co(II), Cu(II) and Pb(II) by polymeric surfaces such as poly 2-hydroxyethyl methacrylate (PHEMA) and copolymer 2-hydroxyethyl methacrylate with monomer methyl methacrylate P(MMA-HEMA) as adsorbent surfaces from aqueous single solution were investigated with respect to the changes in pH of solution, adsorbent composit...

A carbonaceous adsorbent (TPC) prepared from Thespusia populinia bark by acid treatment was tested for its efficiency in removing Rhodamine B (RDB). The parameters studied include agitation time, initial dye concentration, carbon dose, pH and temperature. The adsorption followed first order reaction equation and the rate is mainly controlled by intra-particle diffusion. Freundlich and Langmuir ...

This work is devoted to the application of hydrophobic silica based aerogels and xerogels for the removal of three toxic organic compounds from aqueous solutions. These materials were tested and characterized regarding their morphology, particle size distribution, surface area and porous structure. The equilibrium tests were carried out at different adsorbate concentrations and the experimental...

The adsorption of textile dyes by clay was investigated using basic dye (Methylene Blue). Adsorption of dye effluent onto clay samples was carried by batch studies at room temperature, 25oC. The effects of adding clay with zeolite, pH and shaking time towards adsorption performance were investigated. The results from the mixture of 1.0 g clay and 0.01 g zeolite, the increases of pH, pH 9 and th...

This research work investigates the application of KOH impregnated jackfruit leaf powder to remove Nickel from wastewater. The removal characteristics of Nickel from wastewater was investigated under various operating variables like contact time, adsorbent dosage, initial metal concentration, solution pH, temperature and stirring speed. The results showed that the KOH impregnated jackfruit leaf...

After synthesizing Ag nanoparticles and loading onto activated carbon (from olive stone), the adsorption of methyl orange (MO) onto the prepared nanoparticles was studied. In this connection, the effect of experimental parameters such as pH range, reagent concentration, contact time, dosage amount of adsorbent and so on, on the adsorption process were studied. The experimental results were anal...