Rice husk a very low cost material has been utilized as adsorbent for the removal of lead from industrial effluents. Adsorption studies have been carried out at 28°Cand the effect of initial lead concentrations (100-1000) mg/l, adsorbent dosage (0.05-1) g, pH (2-10) and contact time (10-180) min on lead uptake to establish a mathematical model description percentage removal of Pb (II). The infl...

The optimization of adsorption-based operations requires an accurate model to represent the separation process. In the present study, single-component adsorption data of L-lysine on its imprinted polymer were fitted to Freundlich, Langmuir-type and Jovanovic-type models. L-Lysine imprinted polymer (LLIP) was prepared by free radical solution polymerization. The best estimate of the parameters o...

This paper describes the performance of Granular Activated Carbon (GAC) to adsorb and separate glucose and maltose solutes from the industrial effluents by adsorption process. In this study, the capability of Granular Activated Carbon (GAC) to adsorb glucose and maltose were experimentally examined. Commercial GAC (mesh 12-20), supplied by Sigma Aldrich company in...

background dyes are one of the most important industrial pollutants, especially in textile industries. many methods have been proposed in order to remove color from wastewater among which, adsorption is more acceptable due to the ability for its use in the large scale. objectives the objective of this study was to investigate pumice as an inexpensive adsorbent for removal of methylene blue from...

Phosphate removal to a hydrothermally modified fumed silica and pulverized oyster shell material for use in wastewater treatments were made. Sorption data modeling (pH's 3-11, P concentrations of 3, 5, 10, 15, 20, & 25 mg/L, and at an ambient temperature of 23°C) indicate that an optimal removal of P occurs at pH 11. Three kinetic models were also applied (a pseudo-first-order Lagergren kinetic...

Microwave stabilized heavy metal sludge was used as an adsorbent to remove the copper ions from aqueous solution. The adsorption characteristics of copper on the stabilized-sludge were studied by various models, such as Freundlich and Langmuir isotherm equation. Results show that the pH(zpc) of stabilized-sludge was at 9.2-9.5. Moreover, the adsorption of copper ions onto the stabilized-sludge ...

Removal of fluoride ions was investigated using a new adsorbent of yttrium alginate biocomposite (YALG). Effect of various parameters such as pH, contact time, initial concentration of fluoride ions and temperature on the sorption capacity of adsorbent was studied. Performing a mathematical assessment of fluoride sorption, isotherm and kinetics models including Freundlich & Langmuir isotherms a...

Arsenic, one of the most toxic and dangerous elements in the environment affecting millions of people around the world, is associated with several diseases. In this pilot study, we investigated removal of arsenate from aqueous solutions using chitosan under the influences of initial arsenic ion concentrations, pH, contact time, and adsorbent dosages of chitosan. In order to assess the sorption ...

Phosphorus sorption characteristics of some Indian representative agricultural soils belonging to four soil orders namely Vertisol, Inceptisol, Alfisol and Ultisol were investigated for adsorption behaviour of P and sorption data were fitted to Langmuir and Freundlich equations. The Langmuir constant i.e. adsorption maxima was highest for Vertisol (716.85 μg g -1 ), followed by Ultisol (633.3 μ...

Experimental measurements have been made on the batch ion exchange of Ca(II) and Mg(II) from potassium chromate solution using cation exchanger of Amberlite IRC 748 as K+ form. The ion exchange behavior of two alkaline-earth metals on the resin, depending on contact time, pH, temperature and resin dosage was studied. The adsorption isotherms were described by means of the Langmuir and Freundlic...