We perform numerical simulations of a shear flow over a periodically patterned substrate with entrapped gas bubbles. A diffuse-interface model is employed to handle the liquid-gas interface deformation and the three-phase contact line. Depending on the shear rate and the pattern geometry, four flow regimes are observed. The contact lines can be pinned, depinned, or eliminated depending on the c...

A pilot-scale reactor, consisting of a set of two-stage-in-series biotrickling filters, an influent gas supply system and a liquid recirculation system, was utilized to treat ammonia in an airstream. Each stage of the biotrickling filter was constructed from a 20 cm × 200 cm (inner diameter × height) acrylic column packed with cokes (average diameter = 3.0 cm, specific area = 150 m/m) of 125 cm...

We present a route for producing monodisperse micro and nanodrops that is based on a liquid-gas phase transition occurring within a microfluidic device. A gas which is soluble in water is mixed with an insoluble one and injected into an aqueous surfactant solution, using a microfluidic device that produces monodisperse bubbles. As the soluble gas diffuses out of the bubbles, they shrink and the...

The influence of reactor pressure up to 6.0 MPa on the dynamic liquid hold-up in the trickle-flow regime with superficial gas velocities up to 5.2 cm/s has been investigated for water, ethanol and aqueous 40% ethyleneglycol, with nitrogen as the gas phase. Without gas flow, i.e. single-liquid trickle-flow operation, the reactor pressure has no influence on the dynamic liquid hold-up, which can ...

The flow topologies of gas and liquid injection into hypersonic crossflow are compared with the flow topology around 3D rigid obstacles in hypersonic flow. Experimental techniques such as oil flow visualization, infrared thermography, sublimation technique and high speed Schlieren photography are applied for a Mach 6 crossing flow on a flat plate. The shock system and the vortex system are visu...

Gas-lift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of liquid column. They are widely used in various industrial applications such as oil extracting in petroleum industries. Gas-liquid flow being the main part of the flow through these systems, flowing in vertical pipes of gas-lift pumps has different regimes namely bubbly, slug, chur...

This work investigates the effect of different conditions of PFO thermal cracking from two PFO samples on liquid, solid and gas product yield and asphaltene removal efficiency in a new designed experimental setup. No need to use a catalyst, simple operating system and experiment conditions, the ability to use water as a cheap carrier gas and high asphaltene extraction efficiency without the use...

In making the gas-solid-liquid phase analysis, based on the collaborative study of the internal and external humidification ratio of desulfurization efficiency, determine the humidifier ratio within 60% to 75%, that can make the best balance between the respective merits of a simple tower humidifiers tower humidifier way, optimizing the overall desulfurization reaction, effectively reducing the...

A three-dimensional Lattice Boltzmann two-phase model capable of dealing with large liquid and gas density ratios and with a partial wetting surface is introduced. This is based on a high density ratio model combined with a partial wetting boundary method. The predicted three-dimensional droplets at different partial wetting conditions at equilibrium are in good agreement with analytical soluti...

this study propose a new analytical protocol for the determination of benzene, xylene, toluene and styrene in water samples using homogeneous liquid-liquid microextraction via flotation assistance (hllme-fa) technique followed by gas chromatography-mass spectrometry (gc-ms). in this research, a special extraction cell was designed to facilitate collection of the low-density solvent extraction. ...