High-density polyethylene (HDPE) melts have been previously identified as having an unusually high degree of molecular order, but the rheological implications of this have heretofore not been explored. This has been a serious oversight, inasmuch as HDPE melt processing is one of the major tasks of the world's polymer industry. Here, we investigate several industrial samples of HDPE, covering a ...

The fiber characteristics (i.e., the fiber type, morphology, and dimension) and polymer melt flow index (MFI) significantly affected mechanical properties of sugarcane fiber/HDPE composites. The length and diameter of sugarcane fibers followed a lognormal distribution before and after compounding. The long fibers had a significant reduction in the dimension and aspect ratio during compounding. ...

Using laboratory soil chambers a nonscaled representation of an agricultural raised bed was constructed. For a sandy loam soil, 1,3-dichloropropene (1,3-D) and chloropicrin (CP) were applied at 5 cm depth with an excess of water (simulated drip irrigation). Application was made under both high density polyethylene (HDPE) and virtually impermeable film (VIF) covering the soil bed (the furrow was...

Nonylphenol (NP) is used as an antioxidant and plasticizer in some plastic products. After the discovery of its endocrine-disrupting potential, concern over human exposure to this chemical has increased. Recently, a group in Germany estimated the average daily intake of NP from food (7.5 microg/day), excluding water. In the present study, NP, octylphenol (OP), and their respective ethoxylates (...

The objectives of this technical note are to review the gas transport mechanisms through flexible geomembranes, and to measure the methane gas transmission rate, permeance, and permeability coefficient of PVC, LLDPE, and HDPE geomembranes by performing the standard gas transport test (ASTM D1434). The measured methane gas permeability coefficient through a PVC geomembrane is 7.55 3 10 ml(STP).m...

Reducing emissions is essential for minimizing the impact of soil fumigation on the environment. Water application to the soil surface (or water seal) has been demonstrated to reduce 1,3-dichloropropene (1,3-D) emissions in soil column tests. This study determined the effectiveness of water application to reduce emissions of 1,3-D and chloropicrin (CP) in comparison to other surface seals under...

In this paper, the implications of melt compatibility on thermal and solid-state properties of linear low density polyethylene/high density polyethylene (LLDPE/HDPE) blends were assessed with respect to the effect of composition distribution (CD) and branch content (BC). The effect of CD was studied by melt blending a metallocene (m-LLDPE) and a Ziegler-Natta (ZN) LLDPE with the same HDPE at 19...

The effect that polymer molecular weight has on the dispersion of relatively polar montmorillonite (MMT) in nonpolar, unmodified high density polyethylene (HDPE) was examined. Polymer layered silicate (PLS) nanocomposites were prepared via melt compounding in a single screw extruder using three unmodified HDPE matrices of differing molecular weight and organically modified MMT (organoclay) in c...

Soil fumigation in greenhouses or agricultural fields often includes tarping the soil surface with polyethylene (PE) films to contain the fumigant in the soil and reduce emissions to the atmosphere. Previous research has demonstrated that PE films are permeable to methyl bromide and other fumigant compounds. In these experiments, the effect of temperature, fumigant mixtures, condensed water, an...

Antioxidant depletion was evaluated in high-density polyethylene (HDPE) geomembrane (GM) coupons immersed in radioactive synthetic leachate (RSL) representative of leachate in low-level radioactive waste (LLW) disposal facilities operated by the U.S. Department of Energy’s environmental restoration programs. Depletion was assessed at four temperatures (25, 50, 70, and 90°C). Comparative tests w...