The present paper deals with a feasibility study of Compton scattering technique for inspection of concrete structures for the detection of local defects and the discrimination between materials of different density and composition, such as concrete, void and steel. The experimental setup consists of a Cs radioactive source and a HPGe planar detector providing high resolution energy dispersive ...

    Freezing and thawing resulting from the ingression of water into concrete causes cracking or spalling. Corrosive ions such as chloride or sulfate penetrate the concrete surface and eventually reach the reinforcing steel. This causes the steel to corrode.     Because of the high maintenance and replacement costs, responsible officials should be increasingly concerned about the growing number...

The particle size distribution of output material is affected by type of crusher used .The demolition debris of particle size less than 37.5 mm. The inclusion of upto 15% of particle larger than 37.5 mm should not alter density significantly. Water absorption of coarse and fine particle of crushed brick aggregates passing 19 mm 4.75 mm respectively and retaining on 4.75 mm are 6.15 % and 6.20 %...

lateral resistance of railway track is one of the most important parameters in lateral stability. this parameterdepends!on the conditions of different components of ballasted railway track (such as density of ballast layer,sleeper spacing, type of sleeper, etc.). from this perspective, type of sleeper has an important effect on lateralresistance. however in some conditions, in technical and eco...

micro silica (ms) is an extremely fine, spherical powder that is used as an additive for improving concrete performance. it is obtained as a by product of silicon metal and ferrosilicon alloy production.  due to its pozzolanic nature, micro silica can be used to enhance the qualities of both  fresh  and  hardened  concrete. addition of micro silica into the concrete as a cement replacement, dec...

The influence of carbonation on corrosion of reinforcement depends on the degree of ease of diffusion of CO2 through the concrete from its surface, also on environmental conditions, on the pore structure of concrete (cement, aggregates, and water (without additives)) and on the W / C, where a high ratio generates porous and permeable mortar and concrete (Duran C., 2003; Troconis O. et al., 2006...

The presence of capillary pores and air voids influences concrete permeability to a large extent. Concrete density is inversely proportional to its porosity. The ingress of aggressive agents into the pore structure is responsible for various durability problems in concrete structures. Therefore, a durable concrete should have low permeability. Permeability of concrete increases with the increas...