Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...

in this study, we have theoretically investigated the effect of electron stopper layer on internal temperature distribution of high performance vertical cavity surface-emitting laser emitting at 1305 nm.  simulation software pics3d, which self-consistently combines the 3d simulation of carrier transport, self-heating, gain computation and wave-guiding, was used. simulation results show that cha...

due to the fact that many application processes take place at different temperature, better examining and understanding of swelling properties as a function of temperature is essential for such application. the temperature effect on the swelling properties of commercial polyacrylic acid (paa) hydrogel beads was investigated as a function of time and temperature. gel bead size, swelling equilibr...

effect of temperature on hydrodynamics of bubbling gas-solid fluidized beds was investigated.  experiments were carried out in the range of 25-600 ºc and different superficial gas velocities in the range of 0.17-0.78 m/s with sand particles. time-position trajectory of particles was obtained by radioactive particle tracking technique. these data were used for determination of mean velocities of...

in the present work, high temperature tensile properties of medium density polyethylene (mdpe) and its nanocomposites are investigated. for this purpose mdpe reinforced with different weight percentages of nano-sized calcium (2, 5, 10) are produced by compression moulding method. tensile tests have been carried out at different temperatures, i.e. 30, 60, 90c using thermomechanical analysis (tm...

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...

in this work, the precipitation and re-dissolution of asphaltenes were studied for an iranian relatively heavy crude oil. a series of experiments were designed and carried out to quantitatively examine the reversibility of asphaltenes precipitation upon the change in the solvent concentration along with the temperature. n-heptane was used as the precipitant, and a temperature range of 30 to 70°...