In order to optimize the continuous rolling schedule for improving the quality of rolled tube billet, three dimensional thermal mechanical coupled finite element simulation is applied to analyse the multi-pass continuous rolling process of Ф100mm 37Mn5 steel tube billet from 200mm×200mm square cast bloom. Due to the larger plastic strain occurring at the corner area of the billet, the bias mesh...

Obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. Using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at Mobarakeh Steel Company. The effects of different parameters including the heat resu...

Textures of AZ31 Mg alloy sheets were evaluated by using neutron diffraction method in this study. The AZ31 sheets were fabricated either by conventional casting and subsequent hot rolling or strip casting. The effect of warm rolling was investigated using the AZ31 Mg alloy sheet produced by conventional casting. Warm rolling of 30% thickness reduction per pass was possible without any side-cra...

The main objective of this project was to investigate the behavior and the damaging effects of hot tear segregations in the continuously cast steel blooms on the final product quality. To achieve this aim, plant data from three different types of steels were used. Investigations using the scanning electron microscope (SEM) equipped with energy dispersive x-ray spectroscopy (EDS) probe and metal...

Transfer table is an essential stage between roughing and finishing rolling stands in a hot-strip rolling mill. High temperature and long time that strip is exposed to air at this stage cause a considerable heat loss that accounts for uneven temperature distribution, non-uniform surfaces, reduced product quality and increased production costs. Using thermal shields on the transfer table is cons...

To analyze the effect of initial orientation in activity twinning and texture development, magnesium single crystals were rolled at 400 °C (nominal furnace temperature) two specific orientations. In both orientations, rolling direction sheet (RD) was parallel to c-axis. For 1, 112¯0 normal (ND), for 2, it 101¯0 direction. The samples 30%, 50% 80% thickness reduction. After rolling, all quenched...

in this study, the effects of nitrogen addition on the production of ultrafine/nano grained aisi 201l stainlesssteel by advanced thermo-mechanical process were investigated. cast samples were first homogenized at 1200 °c for 4 h, hot-rolled at 1100 °c and finally, solution-annealed at 1150 °c for 2.5 h. unidirectional and cross multipass cold rolling at 25 °c was carried out to 90% reduction in...