ITO/Pt, In2O3/Pt and ITO/In2O3 thermocouples were prepared by the radio frequency (RF) magnetron sputtering method. The XRD results showed that all annealed ITO In2O3 films at high temperature present a cubic structure. Scanning electron microscope thickness of could reach 1.25 µm 1.21 µm, respectively. ITO/Pt thin film obtain an output voltage 68.7 mV 183.5 mV, respectively, under 900 °C diffe...

The photoelectrochemical properties of nanoheterostructures based on the wide band gap oxide substrates (ZnO, TiO2, In2O3) and CdS nanoparticles deposited by the successive ionic layer adsorption and reaction (SILAR) method have been studied as a function of the CdS deposition cycle number (N). The incident photon-to-current conversion efficiency (IPCE) passes through a maximum with the increas...

Indium oxide (In2O3) nanocrystals (NCs) have been obtained via atmospheric pressure, chemical vapour deposition (APCVD) on Si(111) via the direct oxidation of In with Ar:10% O2 at 1000 C but also at temperatures as low as 500 C by the sublimation of ammonium chloride (NH4Cl) which is incorporated into the In under a gas flow of nitrogen (N2). Similarly InN NCs have also been obtained using subl...

Indium oxide (In2O3) is a promising catalyst for selective CH3OH synthesis from CO2 but displays insufficient activity at low reaction temperatures. By screening range of promoters (Co, Ni, Cu, and Pd) in combination with In2O3 using flame spray pyrolysis (FSP) synthesis, Ni identified as the most suitable first-row transition-metal promoter similar performance Pd–In2O3. NiO–In2O3 was optimized...

Transparent Conductive Oxide Polycrystalline In2O3:Me (Me: W, Ce) and solid-phase crystallized In2O3:Me,H films with high electron mobility can be fabricated at low process temperatures of ≈200 °C by ion plating DC arc discharge, known as high-density plasma enhanced evaporation or reactive deposition (RPD). More details found in article number 2000487 Takashi Koida Yuko Ueno.

The adequate configuration and the effect of reduction was studied for In2O3-ZrO2/SAPO-34 catalyst with aim improving its performance (activity selectivity in pseudo-steady state) hydrogenation CO, CO2 CO2/CO (COx) mixtures into olefins. experiments were carried out a packed bed reactor at 400 °C; 30 bar; H2/COx ratio 3; CO2/COx ratios 0, 0.5 1; space time (referred to as In2O3-ZrO2 mass) 3.35 ...

The development of new heterostructures with high photoactivity is a breakthrough for the limitation solar-driven water splitting. Here, we first introduce indium oxide (In2O3) nanorods (NRs) as novel electron transport layer bismuth vanadate (BiVO4) short charge diffusion length. In2O3 NRs reinforce and hole blocking BiVO4, surpassing state-of-the-art photoelectrochemical performances BiVO4-ba...

In this paper, high-performance UV photodetectors have been demonstrated based on indium oxide (In2O3) thin films of approximately 1.5–2 μm thick, synthesized by a simple and quick plasma sputtering deposition approach. After the deposition, thin-film surface was treated with 4–5 nm-sized platinum (Pt) nanoparticles. Then, titanium metal electrodes were deposited onto sample to form metal–semic...

Single-crystalline metastable corundum-type In2O3 nanotubes were prepared by annealing solvothermally synthesized InOOH nanotubes under ambient pressure at 300 degrees C, and the formation mechanism of the nanotubes was investigated.

We have observed an appearance of clear morphological structure in composites containing In2O3 nanocrystals (NCs) incorporated into polymethyl methacrylite (PMMA) matrices under optical treatment by a polarized femtosecond laser. The initial photoinduced treatment was carried out using a Ti:sapphire femtosecond laser emitting 140 fs p-polarized light at a maximum spectral wavelength 775 nm with...