Decolorization of aqueous solutions containing ionic dyes (Reactive Blue 19 and Acid Black 172) by a TFC commercial polyamide nanofilter (NF) in a spiral wound configuration was studied. The effect of operating parameters including feed concentration (60-180 mg/l), pressure (0.5-1.1 MPa) and pH (6-10) on dye removal efficiency was evaluated. The response surface method (RSM) was utilized for th...

The biosorption potential of three fungal waste-biomasses (Acremonium strictum, Acremonium sp. and Penicillium sp.) from pharmaceutical companies was compared with that of a selected biomass (Cunninghamella elegans), already proven to be very effective in dye biosorption. Among the waste-biomasses, A. strictum was the most efficient (decolorization percentage up to 90% within 30 min) with regar...

The capability of Prunus amygdalus L. (almond) shell for dye removal from aqueous solutions was investigated and methyl orange was used as a model compound. The effects of operational parameters including pH, ionic strength, adsorbent concentration and mesh size, dye concentration, contact time, and temperature on the removal of dye were evaluated. The adsorption kinetics conformed to the pseud...

A new cyclometalated ruthenium complex, [Ru(6'-phenyl-4'-thiophen-2-yl-[2,2']bipyridinyl-4-carboxylic acid)(4,4',4''-tricarboxy- 2,2':6',2''-terpyridine)]Cl, for Dye Sensitized Solar Cells (DSSCs) is proposed. We have investigated the use of cuprous iodide (CuI) as an electrolyte additive, which in turn has shown photocurrent enhancements of more than 25% in our dye based cells. Using an ionic ...

Intercalation products based on ionic exchange reaction between cationic dye methylene blue and Na-montmorillonite were prepared. Montmorillonite particles intercalated with methylene blue were characterized using X-ray diffraction, infrared spectroscopy, elemental and thermo-gravimetric analysis. The results showed that intercalation of dye molecules within the interlayer spaces of montmorillo...

Novel ionic liquid-sulfolane composite electrolytes based on the 1,2,3-triazolium family of ionic liquids were developed for dye-sensitized solar cells. The best performing device exhibited a short-circuit current density of 13.4 mA cm(-2), an open-circuit voltage of 713 mV and a fill factor of 0.65, corresponding to an overall power conversion efficiency (PCE) of 6.3%. In addition, these devic...

We have developed highly efficient, ambient temperature, solid-state ionic conductors (SSICs) for dye-sensitized solar cells (DSSCs) by doping a molecular plastic crystal, succinonitrile (SN), with trialkyl-substituted imidazolium iodide salts. High performance SSICs with enhanced ionic conductivity (2-4 mScm⁻¹) were obtained. High performance solid-state DSSCs with power conversion efficiency ...

Several methods (e.g., UV/H2O2 oxidation, adsorption, flocculation-precipitation) are normally employed to remove dye from water. A new technique based on liquid/liquid extraction using reverse micelles is proposed whereby recovery of solvent and reuse of dye is possible. Experiments were conducted by mixing a known quantity of dye in aqueous phase and solvent-containing surfactants in a simple...

Preliminary studies by Beers et a2. (1) have shown that the zinc salt of acridine orange can either inhibit or accelerate the rate of polymerization of polynucleotides by polynucleotide phosphorylase of Micrococcus lysodeileticus, depending upon the experimental conditions. We have now confirmed these findings with the zinc-free dye. Some evidence for a reversal of inhibition with degraded ribo...

Contrast in confocal microscopy of phase-separated monolayers at the air-water interface can be generated by the selective adsorption of water-soluble fluorescent dyes to disordered monolayer phases. Optical sectioning minimizes the fluorescence signal from the subphase, whereas convolution of the measured point spread function with a simple box model of the interface provides quantitative asse...