this paper deals with three-dimensional evaluation of the slopes on the basis of limit analysis. an upper-bound technique of limit analysis is used in this paper to determine either the bearing capacity of a shallow foundation near a slope or the safety factor of the slope. the theorems of limit analysis (upper and lower bound) provide a powerful tool for solving problems in which limit loads n...

Because offshore wind turbines are high-rise structures, they transfer large horizontal loads and moments to their foundations. One of the keys to designing a foundation is determining the sensitivities and laws affecting its load-bearing capacity. In this study, this procedure was carried out for a new high-rise cap pile group foundation adapted to the loading characteristics of offshore wind ...

OBJECTIVES To determine the static load-bearing capacity of direct composite onlay restorations made of novel filling composite resin system which combines short fiber-reinforced composite resin (FC) and conventional particulate filler composite resin (PFC). METHODS Three groups of onlay restorations were fabricated (n = 8/group); Group A: made from conventional particulate filler composite r...

In this paper, three-dimensional elasto-plastic finite element analysis was performed on flexible pavements under vertical repeated traffic loads to evaluate their shakedown behavior. Six different pavements with different structural number (SN) were modeled and subjected to a wide range of cyclic vehicle loads. Shakedown limits were obtained considering both failure and serviceability restrain...

In this paper the problem on “Magnetic fluid lubrication of porous-pivoted slider bearing with slip velocity by N Ahmad et.al.[7]” has been recapitulated using Jenkin’s model [4] with the additional effect of squeeze velocity of the above plate. It is found that while discussing the above problem, [7] has stated but ignored the term , where +, in their study (Refer equation(2.2)). This paper re...

An attempt has been made to study and analyze the performance of a rough hyperbolic slider bearing under the presence of a magnetic fluid lubricant. The magnetic field is oblique to the stator and the bearing surfaces are considered to be transversely rough. The roughness of the bearing surface is characterized by a stochastically random variable with non-zero mean, variance and skewness. The c...

Based on tests on six L-shaped RC columns with 500 MPa steel bars, the effect of axial compression ratios and stirrup spacing on failure mode, bearing capacity, displacement, and curvature ductility of the specimens is investigated. Test results show that specimens with lower axial load and large stirrup characteristic value (larger than about 0.35) are better at ductility and seismic performan...

The aim of the study was to determine the static load-bearing capacity of fractured incisal teeth restored with the conventional adhesive-composite technique or by using fiber reinforced composites (FRC). Upper incisal teeth were prepared by cutting the incisal part of the crown horizontally. Restorations were made by three techniques. Group A (control group) was restored by reattaching the ori...