نتایج جستجو برای: lungmuir adsorption isotherm
تعداد نتایج: 56224 فیلتر نتایج به سال:
The need to clean-up heavy metal contaminated environment can not be over emphasized. This paper describes the adsorption isotherm studies of Cd (II), Pb (II) and Zn (II) ions from aqueous solution using unmodified and EDTA-modified maize cob. Maize cob was found to be an excellent adsorbent for the removal of these metal ions. The amount of metal ions adsorbed increased as the initial concentr...
Sorption-based heat transformation and storage appliances are very promising for utilizing solar heat and waste heat in cooling or heating applications. The economic and ecological efficiency of sorption-based heat transformation depends on the availability of suitable hydrophilic and hydrothermally stable sorption materials. We investigated the feasibility of using the metal-organic frameworks...
The adsorption characteristics of 4-chloro-2-nitrophenol (4C2NP) onto single-walled and multi-walled carbon nanotubes (SWCNTs and MWCNTs) from aqueous solution were investigated with respect to the changes in the contact time, pH of solution, carbon nanotubes dosage and initial 4C2NP concentration. Experimental results showed that the adsorption efficiency of 4C2NP by carbon nanotubes (both of ...
In this paper, the ability of coconut bunch waste (CBW), an agricultural waste available in large quantity in Malaysia, to remove basic dye (methylene blue) from aqueous solution by adsorption was studied. Batch mode experiments were conducted at 30 degrees C to study the effects of pH and initial concentration of methylene blue (MB). Equilibrium adsorption isotherms and kinetics were investiga...
High surface area and highly mesoporous activated carbon fibers (ACF) were obtained by physical activation of natural precursors (vetiver roots and bagasse) with steam and chemical activation using phosphoric acid. The textural characteristics of the activated were determined by nitrogen adsorption study and mercury porosimetry and showed that interesting porosity were obtained (SBET up to 1600...
the work focuses on the removing of cu(ii) from aqueous solution by linde f(k) zeolite. the zeolite is synthesized from fly ash by hydrothermal process. the adsorption experiments discuss several factors including the optimal solution ph, zeolite dosage, adsorption temperature, adsorption kinetics and adsorption isotherm equation. the results show that, the optimal solution ph is 6 and the effi...
Rice straw/magnetic nanocomposites (RS/Fe3O4-NCs) were prepared via co-precipitation method for removal of Pb(II) and Cu(II) from aqueous solutions. Response surface methodology (RSM) was utilized to find the optimum conditions for removal of ions. The effects of three independent variables including initial ion concentration, removal time, and adsorbent dosage were investigated on the maximum ...
A simple isotherm model has been developed for the type-5 equilibrium adsorption systems by considering the effects of both primary and secondary adsorptive sites. The model was applied to interpret experimental data describing water vapor adsorption capacities of four activated carbon adsorbents for relative vapor pressures from 0.0 to 0.95 and temperatures between 288 and 308 K. Good agreemen...
jute modified has been used for adsorption of cr (vi), cd (ii) and pb (ii) ions over a range ofinitial metal ion concentration. adsorption process is done in batch mode. adsorption isotherms ofthe heavy metals on adsorbents prepared were determined and correlated with common isothermequations. it was found that the freundlich isotherm is better than langmuir for explaining thebehavior of adsorp...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید