The sequence of steps of a chemical treatment having as its goal the induce of nucleation and the growth of hydroxyl carbonated apatite (HCA) at the surface of titanium implants was studied by scanning and transmission electron microscopy in cross-section. In the first step, an acid etching forms a rough titanium hydride layer, which remains unchanged after subsequent treatments. In the second ...

The full matrix of electro-elastic constants of sillenite-type crystals Bi12TiO20 (BTO) and Bi12SiO20 (BSO) were determined by the resonance method, with d14 and k14 being on the order of 40–48 pC/N and 31%–36%, respectively. In addition, double-rotated orientation dependence of d33 was investigated, with the maximum values of 25–28 pC/N being achieved in ZXtl45°/54°-cut samples. The electrical...

Three kinds of water-soluble graphene: (WSG: polystyrene sulfonate, titanate coupling agent and glucose)/reduced graphene oxide were prepared for fabricating magnesium-air batteries with AP65 anode. Corrosion behaviour discharge performance investigated. The three added respectively in NaCl solution result a more negative potential lower exchange current density the potentiodynamic polarization...

A silver nanoparticle (AgNP)-filled hydrogen titanate nanotube layer was synthesized in situ on a metallic titanium substrate. In the synthesis approach, a layer of sodium titanate nanotubes is first prepared on the titanium surface by using a hydrothermal method. Silver nitrate solution is absorbed into the nanotube channels by immersing a dried nanotube layer in silver nitrate solution. Final...

INTRODUCTION The extent of wound contamination in gunshot injuries is still a topic of controversial debate. The purpose of the present study is to develop a model that illustrates the contamination of wounds with exogenous particles along the bullet path. MATERIAL AND METHODS To simulate bacteria, radio-opaque barium titanate (3-6 μm in diameter) was atomized in a dust chamber. Full metal ja...

In this research, calcium titanate nanoparticles have been synthesized via mechanical alloying (MA). By changing the parameters of mechanical alloying, optimal conditions for synthesis of this compound was determined. For synthesis of this compound, a mixture of calcium hydroxide and titanium dioxide, rotation speed of 250 rpm and differnet ball to powder weight ratio was used. Phase investigat...

A plate-plate binary colloid system of photocatalytically active titanate and inert clay nanosheets shows macroscopically separated multiphase coexistence. Two liquid crystalline phases and one isotropic phase coexist at high titanate and low clay concentrations whereas the colloids are destabilized at high clay concentrations.

In this study, a mixture of magnesium oxide and titanium dioxide was mechanically activated in order to investigate the possibility mechanochemical synthesis titanate. Mechanical activation performed for 1000 min high-energy vibro mill (type MH954/3, KHD Humboldt Wedag AG, Germany). The is equipped with housing having horizontally placed shutter. cylindrical stainless steel working vessel, inne...

Magnesium zirconate titanate (MZT) thin films, used as a sensing layer on Al interdigitated electrodes prepared using sol–gel spin-coating method, are demonstrated in this study. The p-type MZT/Al/SiO2/Si structure for NO2 is also discussed. results indicated that the best sensitivity of gas sensor occurred when it was operating at temperature ranging from 100 to 150 °C. detection limit low 250...