Fe2O3 nanorods exposing (001) and (010) plane as well as Fe2O3 nanosheets exposing (001) plane have been successfully synthesized. Fe2O3 nanosheets exhibit better cycle performance and rate capabilities than that of Fe2O3 nanorods. The discharge capacity of Fe2O3 nanosheets can stabilize at 865 mAh/g at the rate of 0.2 C (1C = 1000 mA/g) and 570 mAh/g at the rate of 1.2 C after 80 cycles, which...

Complex hierarchical structures have received tremendous attention due to their superior properties over their constitute components. In this study, hierarchical graphene-encapsulated hollow SnO2@SnS2 nanostructures are successfully prepared by in situ sulfuration on the backbones of hollow SnO2 spheres via a simple hydrothermal method followed by a solvothermal surface modification. The as-pre...

Lithium-oxygen batteries have a great potential to enhance the gravimetric energy density of fully packaged batteries by two to three times that of lithium ion cells. Recent studies have focused on finding stable electrolytes to address poor cycling capability and improve practical limitations of current lithium-oxygen batteries. In this study, the catalyst electrode, where discharge products a...

Through electrostatic interaction and high-temperature reduction methods, rGO was closely coated onto the surface of TiO2 nanotubes. Even at a high temperature of 700 °C, the nanotube morphology of TiO2 (anatase) was preserved because of the assistance of rGO, which provides a framework that prevents the tubes from breaking into particles and undergoing a phase transformation. The rGO/TiO2 nano...

As an alternative to pure lithium-ion, Li+, systems, a hybrid magnesium, Mg2+, and Li+ battery can potentially combine the high capacity, high voltage, and fast Li+ intercalation of Li-ion battery cathodes and the high capacity, low cost, and dendrite-free Mg metal anodes. Herein, we report on the use of two-dimensional titanium carbide, Ti3C2Tx (MXene), as a cathode in hybrid Mg2+/Li+ batterie...

Owing to the overwhelming advantage in energy density, lithium-sulfur (Li-S) battery is a promising next-generation electrochemical energy storage system. Despite many efforts in pursuing long cycle life, relatively little emphasis has been placed on increasing the areal energy density. Herein, we have designed and developed a 'pie' structured electrode, which provides an excellent balance betw...

One-dimensional (1D) hierarchical porous nanofibers of Co3O4 possessing of (220) facets on the carbon matrix from human hair (H2@Co3O4) with 20-30 nm in width and 3-5 μm in length are prepared by a facile solvothermal and calcination approach. The well crystallized small Co3O4 particles with the diameter of about 8-12 nm were closely aggregated together in the nanofibers. Electrochemical analys...

The porous carbon matrix is widely recognized to be a promising sulfur reservoir to improve the cycle life by suppressing the polysulfide dissolution in lithium sulfur batteries (LSB). Herein, we synthesized mesocellular carbon foam (MSUF-C) with bimodal mesopore (4 and 30 nm) and large pore volume (1.72 cm2/g) using MSUF silica as a template and employed it as both the sulfur reservoir and the...

We demonstrate a room-temperature sodium sulfur battery based on a confining microporous carbon template derived from sucrose that delivers a reversible capacity over 700 mAh/gS at 0.1C rates, maintaining 370 mAh/gS at 10 times higher rates of 1C. Cycling at 1C rates reveals retention of over 300 mAh/gS capacity across 1500 cycles with Coulombic efficiency >98% due to microporous sulfur confine...