Microstructure of Al-Si alloy castings depends most generally on melt preparation and on the cooling rate imposed by the thermal modulus of the component. In the case of Al-Si alloys, emphasis is put during melt preparation on refinement of pro-eutectic (Al) grains and on modification of the Al-Si eutectic. Thermal analysis has been used since long to check melt preparation before casting, i.e....

BACKGROUND The aim of this study was to enhance the bioavailability of fenofibrate, a poorly water-soluble drug, using a melt-adsorption method with supercritical CO(2). METHODS Fenofibrate was loaded onto Neusilin(®) UFL2 at different weight ratios of fenofibrate to Neusilin UFL2 by melt-adsorption using supercritical CO(2). For comparison, fenofibrate-loaded Neusilin UFL2 was prepared by so...

Indomethacin (IM), most widely used non-steroidal anti-inflammatory drug widely used in developing countries, is classified in Class II in the Biopharmaceutics Classification Systems; this means that IM has very low water solubility and high permeability, thus the dissolution is the absorption rate-limiting factor. The aim of this work was to evaluate the suitability of melt granulation techniq...

Machining operations of cast parts usually generate considerable amounts of waste in the form of chips (usually 3–5% of the casting weight). Traditionally, swarf is sold to scrapers and remelters, but this option is quite expensive because the selling price is roughly 30% of the acquisition price of the commercial 2nd melt raw material. For most aluminium foundries that incorporate machining op...

Nowadays, the production of 3D MEMS and MOEMS is carried out by using hybrid integration of single components, for which batch production is normally preferred. In this field, adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique which uses hot melt adhesives was developed. This technique allows the coa...

The purpose of the study was to increase the dissolution and bioavailability of BCS class II drug, paliperidone by amorphization. The technique that was evaluated for preparing amorphous paliperidone (PAL) was Hot Melt Extrusion (HME). In case of hot melt extrusion process, copovidone was used essentially as a hydrophilic polymer with plasticizers like PEG (6000 and 20000), stearic acid and cet...

The aim of this work is to analyze the possibility producing a joint by lamination an Al-1050 plate and Fe78Si9B13(%at.) soft magnetic ribbons material obtained rapid solidification process using Melt Spinning (MS) technique. conditions are studied on characteristics joint, microstructure, properties. Mainly surface preparation, temperature, reduction thickness. characterized X-Ray Diffraction,...