Highly uniform samples of carbon nanofoam from hydrothermal sucrose carbonization were studied by helium ion microscopy (HIM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Foams with different densities were produced by changing the process temperature in the autoclave reactor. This work illustrates how the geometrical structure, electron core levels, and the vibrational sign...

The present work investigates the compressive property of Al matrix composite foams at different temperatures between room temperature and 200 ◦C. Elevated temperature results in a decreased compressive strength and energy absorption capacity of as-received Al foams. Therefore, to maintain the compressive property, the Al2O3 ceramic coating was deposited on the Al struts of the foams by the pla...

Compressive behaviour of bovine cancellous bone and three open-cell metallic foams (AlSi7Mg (30 ppi and 45 ppi); CuSn12Ni2 (30 ppi)) has been studied using mechanical testing, micro-focus computed tomography and finite element modelling. Whilst the morphological parameters of the foams and the bone appear to be similar, the mechanical properties vary significantly between the foams and the bone...

Nickel–aluminide foams were synthesized from unalloyed nickel foams by using a two-step, high-activity pack-aluminizing process at 1273 K. After processing, the nickel–aluminide foams exhibited the original structure of the original nickel foams (open-cells with hollows struts and low density). Single-phase NiAl foams, with average composition within 1 wt.% of stoichiometry and with 92% open po...

Collagen I foams are used in the clinic as scaffolds to promote articular cartilage repair as they provide a bioactive environment for cells with chondrogenic potential. However, collagen I as a base material does not allow for precise control over bioactivity. Alternatively, recombinant bacterial collagens can be used as "blank slate" collagen molecules to offer a versatile platform for incorp...

The effects of metal foams on heat transfer enhancement in Phase Change Materials (PCMs) are investigated. The numerical investigation is based on the two-equation non-equilibrium heat transfer model, in which the coupled heat conduction and natural convection are considered at phase transition and liquid zones. The numerical results are validated by experimental data. The main findings of the ...

Polyurethane foam (PUF) is an outstanding material for various applications, which is manufactured by propelling liquid isocyanate-polyol mixture to form foams in the presence of blowing agent. In order to reduce the ozone depletion and environmental pollution from organic blowing agents, waterblown PU foams were prepared with various water levels (311phr), and the effects of water level on mec...

Tannin/furanic rigid foams were modi ed by either polymeric 4,4’ diphenylmethane diisocyanate (pMDI) or a one-component polyurethane still presenting reactive isocyanate groups (PUR). Several di erent sequences of mixing the isocyanate and polyurethane with the chemicals used to prepare tannin-based foams were tested. Scanning electron microscopy (SEM) showed that addition of either pMDI or PUR...

Amit Desai, Maria L. Auad, 1 Hongbin Shen and Steven R. Nutt* Gill Foundation Composites Center, Department of Chemical Engineering and Materials Science, University of Southern California, 3651 Watt Way VHE-602, Los Angeles, CA 90089-0241, USA * E-mail: [email protected] Abstract: Hybrid composite phenolic foams are reinforced with chopped glass and aramid fibers in varied proportions. The mechanic...

Open cell foams consisting of Fe and Fe-Mn oxides are prepared from metallic Fe and Mn powder precursors by the replication method using porous polyurethane (PU) templates. First, reticulated PU templates are coated by slurry impregnation. The templates are then thermally removed at 260 °C and the debinded powders are sintered at 1000 °C under N₂ atmosphere. The morphology, structure, and magne...