The optical properties of InGaN/GaN laser diode based on quaternary alloys stopper and superlattice layers are numerically studied using ISE TCAD (Integrated System Engineering) simulation program. Improvements in laser optical performance have been achieved using quaternary alloy as superlattice layers in InGaN/GaN laser diodes. Lower threshold current of 18 mA and higher output power and slop...

We study the spin and valley dependent transport in a silicene superlattice under the influence of a magnetic exchange field, a perpendicular electric field and a voltage potential. It is found that a gate-voltage-controllable fully spin and valley polarized current can be obtained in the proposed device, and the spin and valley polarizations are sensitive oscillatory functions of the voltage p...

Coherent folded longitudinal acoustic phonons in a GaAs/AlAs long-period superlattice have been investigated by using a reflection-type two-color pump-probe technique under the condition that the wave vector of the probe pulse in the sample exceeds the mini-Brillouin zone. The coherent oscillations observed in the time-domain signals indicate the propagation of the phonon wave packet through th...

The thermal conductivity of silicon nanowires (SiNWs) is investigated by molecular dynamics (MD) simulation. It is found that the thermal conductivity of SiNWs can be reduced exponentially by isotopic defects at room temperature. The thermal conductivity reaches the minimum, which is about 27% of that of pure 28Si NW, when doped with 50% isotope atoms. The thermal conductivity of isotopic-super...

Seebeck coefficient is one of the key parameters to evaluate the performance of thermoelectric coolers. However, it is very difficult to directly measure Seebeck coefficient perpendicular to thin film devices because of the difficulty of creating a temperature gradient and measuring localized temperature and voltage change simultaneously. In this paper, a novel method is described and it is use...

Multilayer superlattice coatings of TiN/CrN were deposited on silicon substrates using a reactive d.c. magnetron sputtering process. Superlattice period, also known as modulation wavelength (A), was controlled by controlling the dwell time of the substrate underneath Ti and Cr targets. X-ray diffraction (XRD), nanoindentation and atomic force microscopy (AFM) were used to characterize the fdms....

Scanning thermal microscopy has been implemented in a cross-sectional geometry, and its application for quantitative, nanoscale analysis of thermal conductivity is demonstrated in studies of an ErAs/GaAs nanocomposite superlattice. Spurious measurement effects, attributable to local thermal transport through air, were observed near large step edges, but could be eliminated by thermocompression ...

In this paper we propose to tailor the bandwidth of a microwave filter by exploitation of shape anisotropy of nanowires. In order to achieve this control of shape anisotropy, we considered superlattice wires containing varying-sized ferromagnetic regions separated by nonferromagnetic regions. Superlattice wires of Ni and Au with a nominal diameter of 200nm were grown using standard electrodepos...

SiGe is one of the best thermoelectric materials for high temperature applications. Superlattice structures can further enhance the thermoelectric properties by reducing the thermal conductivity and by increasing the Seebeck coefficient via selective emission of hot electrons through thermionic emission. SiGe/Si superlattice structures were grown on a silicon wafer using molecular beam epitaxy....

We report our recent work on the growth and fabrication of InAs/GaSb type II superlattice photodiode detectors. The superlattice consists of 9 monolayer InAs/12 monolayer GaSb in each period. Lattice mismatch between the GaSb substrate and the superlattice is 1.5 × 10-4. The full width at half maximum of the first-order satellite peak from X-ray diffraction is 28 arc sec. The P-I-N photodiodes ...