With increasing demands for wireless sensing nodes for assets control and condition monitoring; needs for alternatives to expensive conventional accelerometers in vibration measurements have been arisen. Micro-Electro Mechanical Systems (MEMS) accelerometer is one of the available options. The performances of three of the MEMS accelerometers from different manufacturers are investigated in this...

INTRODUCTION Micro Electro Mechanical Systems (MEMS) based micro-positioning stages are critically important in many micro/nano manipulation and manufacturing applications. Such stages have been extensively used in micro-force sensors, scanning probe microscopy and micro optical lens scanners [1-4]. While there is no unique definition for a micro-positioning stage, it generally refers to a syst...

Micro Electro Mechanical Systems (MEMS) have already revolutionized several industries through miniaturization and cost effective manufacturing capabilities that were never possible before. However, commercially available MEMS products have only scratched the surface of the application areas where MEMS has potential. The complex and highly technical nature of MEMS research and development (R&D)...

-Micro Electro Mechanical Systems will soon usher in a new technological renaissance. Just as ICs brought the pocket calculator, PC, and video games, MEMS will provide a new set of products and markets. Learn about the state of the art, from inertial sensors to microfluidic devices[1]. Over the last few years, considerable effort has gone into the study of the failure mechanisms and reliability...

A continuing trend these days is the use of micro-electro-mechanical actuators with electronic circuitry to fabricate MEMS devices such as micro-switches, hard disks, optical micro-mirrors ... One of the problems with the electrostatic MEMS actuator is that when an electrical voltage is applied to these devices, the micro-actuators undergo a residual vibration before reaching their permanent po...

Corresponding author, Email: [email protected] ABSTRACT In this paper, we present a preliminary research effort towards an effective computer support environment for the design and development of micro-electro-mechanical systems (MEMS). We first identify the characteristics of MEMS product design and development processes and examine the state-of-the-art of MEMS Computer-aided Design (CAD) and s...

Lithography, the fundamental fabrication process of semiconductor devices, is playing a critical role nowadays in the fabrication of microand nano-structures especially for the realization of micro-electro-mechanical systems (MEMS), microfluidic devices, photonic crystals, photonic integrated circuits, micro-optics, and plasmonic optoelectronic devices. These devices have various practical appl...

This research established the design guidelines for center embossed diaphragms for micro-diaphragm fiber type sensors. Following the guidelines, a center embossed diaphragm fiber optic sensor (CE-DFOS) based on Fabry–Perot interference was designed and fabricated with micro-electro-mechanical system (MEMS) technology. The CE-DFOS was experimentally verified to have the designed intrinsic freque...

Utilizing current Micro Electro Mechanical Systems (MEMS) technologies, a three-port micro-capillary pumped loop (micro-CPL) was designed, fabricated and tested to provide integral cooling to electronics or MEMS type devices. The two wafer design consists of one silicon and one borofloat glass wafer. An analytical study was used in determining the geometry of the device, including the evaporato...

UNLABELLED The utility of micro-electro-mechanical sensors (MEMS) for application in air-coupled (contactless or noncontact) sensing to concrete nondestructive testing (NDT) is studied in this paper. The fundamental operation and characteristics of MEMS are first described. Then application of MEMS sensors toward established concrete test methods, including vibration resonance, impact-echo, ult...