Background: Electrical Discharge Machining (EDM) is a well-established non-conventional machining process for the machining of electrically conductive and difficult-to-machine materials. But its applications are limited because of the slow machining rate and poor surface finish. Powder mixed EDM (PMEDM) is unitary of the recent progresses in the EDM process in which powder particles mixed in th...

in this research, al-ni particle composite strips are formed by accumulative roll bonding (arb) process using al strips and ni powder. the rule of arb cycles and volume percentage (vol%) of ni powder on the microstructure, wear resistance and mechanical properties of the formed composites are investigated. according to the tensile test results, the yield stress and tensile strengths of the al -...

Recently micro particles or microspheres have gained great attention due to their free flowing powder characteristics and biodegradable nature generally made up of protiens or synthetic polymeric materials having particle size in the range of 1-200μm. Depending upon the encapsulation of active drug moieties there are two types of microspheres (microcapsules and micro matrices). Microcapsules ar...

The mechanical alloying process was used to synthesize the Ni50Al50−xMox nanocrystalline intermetallic compound using pure Ni and Al elemental powder. This process was carried out in the presence of various Mo contents as a micro-alloying element for various milling times. Structural changes of powder particles during mechanical alloying were studied by X-ray diffractometry (XRD) and scanning e...

Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...

Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...

The aim of this project is to develop methods for scaling up roller compaction process from lab scale to pilot scale, to determine the effect of processing parameters of roller compactors at both lab scale (instrumented roller compactor at University of Birmingham, micro-pactor at Pfizer) and pilot scale (mini-pactor from Gerteis) on the attributes of dry-granulated formulations, including the ...

This paper describes a method for producing a novel type of ferromagnetic coded micro-carrier. The ferromagnetic coded micro-carriers are about 200 μm in length, 200 μm in width and 50 μm in thickness, and contain eight code elements with two distinguishable codes (hollow and solid), allowing for 2(8) unique codes. The code shapes include rectangle, circle, etc. Differently shaped coded micro-c...